--- In xl7@yahoogroups.com, "steve_the_composer" <smw-mail@...> wrote: > > Addendum: I tried looking for manuals for some of you gear to see what midi i/o/thru each has. I found lots of info, including synth engine capabilities and videos, but I did not find the midi i/o/thru details. (Possibly I looked at the wrong sites and I gave up too soon.) > > As best as I can tell, though, you do not have a midi router, though it seems as though you have 1 In and 1 Out on the focusrite and 1 In and 1 Out on the E-Mu 1x1 that might let you use the computer as a router. However, as a PC person, I don't know what midi filtering/routing software you would use. > > It seems to me that you could have the Virus going to your Mac with 1 Midi In, and your Novation going into the Mac with the other Midi In. If the Novation will pass midi data to the Mac via usb, you could have the KP3 going to the second Midi in of you Mac. > > So, with appropriate sofware you either have 2 in 2 out or 3 in 2 out routing capability (assuming you have Mac software that will do that). > > > Virus --> Mac via focusrite > Novation --> Mac via 1x1 > > Mac --> Mp7 via focusrite > Mac --> KP3 via 1x1 > > OR (if Novation can send midi to Mac via usb): > > Novation --> Mac via usb > > MP7 --> Mac via focusrite > Virus --> Mac via 1x1 > > Mac --> Mp7 via focusrite > Mac --> KP3 via 1x1 > > Would one of these two setups work for you? > > Also, if the virus rack has a thru, you could daisy chain a module to it. > > Hope this helps. > > Steve > I would like to do computerless true hardware setup. Ñomputer is used only for stereo recording. I dont want to do midi routing in software. And yes Virus have midi thru. As I understand you, I can connect novation via virus midi thru to mp7, But emu have only one midi in and i want record virus into mp7 too. that is my problem. and for kp3, i only need send to it midi clock, i dont need use midi out from it.
Message
Re: MIDI setup. Help needed...
2013-06-09 by nikitsanpsix
Attachments
- No local attachments were found for this message.