Emu XL-7 & MP-7 User's Group

moderate use seemed to cure my cs of a few psu symptoms. the last time it wouldn't start up was over two years ago (fingers crossed)

i was in touch with epr electronics and he says if you send in multiple psu's for repair he will only charge the bench fee once which is nice to know



--- In xl7@yahoogroups.com, "intrepidpete" <peteflagg@...> wrote:
>
> Command Station PSU may be going bad. After running for a while, the display starts blinking like the backlight is going out and it keeps saying Loading…  I opened it up, then opened up the PSU cage, looking for "slightly burned" looking resistors and/or "bulging/leaking" capacitors, but could not find anything - visually it looks fine.
> 
> It is now running fine, but I don't want to leave it on for more than a few hours, just in case the issue is related to over-heating or something about it being left on for a long time. It is tricky because when I needed to work on my plasma TV, the bad capacitors were pretty obvious - slightly bulging on top. But with the CS, I don't see anything that needs to be replaced.
>