Emu XL-7 & MP-7 User's Group

I'd add, that the Ensoniq Halo appears to be the only keyboard model with only 12 patch cords (4 knobs with three switches), so that ROM is presumably for 12 patch cords only.

DF


 
CONFIDENTIALITY NOTICE: This communication with its contents may contain confidential and/or legally privileged information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication.


________________________________
 From: steve_the_composer <smw-mail@...>
To: xl7@yahoogroups.com 
Sent: Friday, January 11, 2013 2:53 PM
Subject: [xl7] Re: composer rom in command station - missing patchcords ?
 

  
See below.

--- In xl7@yahoogroups.com, "jezfez"  wrote:
>
> i understand, thanks for your help
> 
> better engineering could have had these knobs mapped to their correct labels and skipping the others

My understanding is that they ARE mapped to the correct label for each ROM that is native to a specific box.  In order words, the XL-7 labels match the XL-7 ROM presets, the XL-1 labels, match the XLEAD ROM presets, etc.

The problem (if you want to think of it as a problem as opposed to an opportunity to really delve into the architecture of the gear)comes in when people put non-native ROMS in their boxes, such as a P2K Composer ROM in a Command Station (or supplemental ROMS that could be purchased separately). 

Unfortunately, the boxes were so well designed that many people don't go beyond the default settings and will just tweak presets as opposed to design their own from scratch. I found it was a fun challenge to zero out all of the patch cords and build a set of presets from scratch. 

Yes, there is a lot to learn, and if you accept the challenge you will surely will be able to do things beyond what you first imagined.  I would encourage such exploration. You really get to know what's what. 

I agree for starters, it is nice that MidiA is Filter Cutoff, MidiB is Resonance, etc. Even after all these years, I don't change a number of these default assignments. Its just a very handy convenience.

Oh, by the way you might find that even with the factory designed presets any particular knob will control different sound shaping parameters via patchcords on different layers in the same preset. I would encourage you to dissect some presets to see what the sound designers did to get the various effects. That way you will have insights into making the box do what you want. 

> jamming away while trying to remember what preset is from what rom to know which knob to turn is a bit of a drag

I use pen and paper, sometimes an index card. Also, if you tweak (or design) presets or just reorganize the factory presets you like, you can use some naming conventions to make it easier to find presets. (I will see if I can find some posts that describe some of the naming convents I use--such as 001: and 002: as prefixes for families of repated presets, using CaPs, etc. 

> 
> do you know what roms support the cs 16 knobs by default ?

I started a table and tried to get members here to contribute basic info about each ROM, including whether each was a 12-controller ROM or a 16-controller ROM. Not a whole lot of people contributed.  The table as I put it together in May is in a folder called TEMP in the files section. Its called ROMS pdf. Its probably about 7% complete. I'd be happy to fill it in if people here want to supply the information about each ROM they have that's not already in the table.

Steve