Do you get the same delay using different samples/patches?
Oh dear. I had dusted off my XL7 and was starting to have quite a lot of fun thinking I would go back to using a hardware sequencer and do a couple of tracks with it. I had been reading about how the timing on these things was to die for compared to software sequencers etc.
Back to Ableton, Logic and Reason I suppose.
--- In xl7@yahoogroups.com, "nikitsanpsix" wrote:
>
> Yes!!! exactly what I`m talking about! Have you any solution for this?
>
> --- In xl7@yahoogroups.com, "steve_the_composer" wrote:
> >
> > Hmmmm. now that you mention phasing, I am remembering something I stumbled onto a few years ago. I turns off all FX and anything that would cause minute delays or pitch shifts, chorus, flange, etc. I repeatedly hit a note and found that the timbre of the same note played one after another was different, like there was an unexplained phase differential. I don't remember much more of my experiments or if I ever tracked the cause down. I want to say that with each keypress, depending on what the processor was doing, there was a miniscule phase difference.
> >
> > Not sure if this is what you are talking about; not sure how much of this I am remembering correctly. I will try to search the archives.
> >
> > Steve
> >
> > --- In xl7@yahoogroups.com, "nikitsanpsix" wrote:
> > >
> > > No I have it even if ie track1 - kick sample (main out), track2 - same kick sample (main out). In result i have some phasing, and flicking sound on output.
> > > when i route track2 on sub out 1 for compressing and return it to my MP7 there is same phasing issue and flick on begin of sample.
> > >
> > > --- In xl7@yahoogroups.com, Alwyn wrote:
> >; > >
> > > > So you are seeing some timing difference between the Sub Output and the
> > > > Main Output?
> > > >
> > > >
> > > >
> > > > On 9 January 2013 16:25, nikitsanpsix wrote:
> > > >
> > > > > **
> > > > >
> > > > >
> > > > > nobody?
> > > > >
> > > > >
> > > > > --- In xl7@yahoogroups.com, "nikitsanpsix" wrote:
> > > > > >
> > > > > > I have psoted some time ago about routing mp7 to external compressor for
> > > > > parallel NY style compression... I have my answer, and thanks to all guys
> > > > > who helps me .
> > > > > > And now I have another trouble with parralel compression...
> > > > > > I have properly conected and routed my outbord compressor to sub 1 and
> > > > > all is working, but there are small differences above few milliseconds with
> > > > > clean and processed signal. It`s sounds not good (flickering in start). To
> > > > > exclude my compressor latency i try simply make two idetical tracks with
> > > > > one kick sound preset (without any fx at all), and i have this latency
> > > > > again.
> > > > > > Any body can try this, two identical tracks sounds with latency!!!!!
> > > > > > why? and how to correct this issue????
> > > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> >
>
Attachments
- No local attachments were found for this message.