Send the drums out submix 1 AND out the main. You will have to set this up inside the preset menu. Then in routing for that channel you will have to choose preset and NOT submix 1.
the drum coming out main will be uncompressed the drum coming out submix 1 insert send u can compress to taste and route back to the submix 1 insert return. They will be mixed back in at the main analog outs.
It`s great!!! But can anybody tell me how i can make a parallel NY style compression with this??? Now i have all drums routed to sub out1 and into 2 channel compressor with insert cables, and with this i have only compressed drums, but i need to mix them with uncompressed signal. How???
thanks.
--- In xl7@yahoogroups.com, Matt wrote:
>
> Not exactly.. yes They are routable by midi channel but they are also
> routable by preset layer if you choose.
> For example you could build a 4 layer drum kit with bass drum layer going
> out sub out 1 (1-2 panned left) snare layer on sub out 2 (1-2 panned right)
> and hats on sub out 3-4 in stereo, and since they are inserts you could
> compress these all seperately with hardware compressors and send them back
> into the main mix.
> On Nov 3, 2012 11:12 AM, "D F Tweedie" wrote:
>
> > **
> >
> >
>; > I am setting them up. The S/DIF parallels the master out, which I
> > understand as all tracks except any separately routed to the sub outs.
> >
> > The sub mix channels appear to be locked to specific midi channels, i.e.,
> > sending the output on a channel by channel selection to one or the other
> > submix ports, mono or stereo. You don't see the sub out option in the
> > Global menu unless there is a a cable plugged in.
> >
> >; DF
> >
> >
> > CONFIDENTIALITY NOTICE: This communication with its contents may contain
> > confidential and/or legally privileged information. It is solely for the
> > use of the intended recipient(s). Unauthorized interception, review, use or
> > disclosure is prohibited and may violate applicable laws including the
> > Electronic Communications Privacy Act. If you are not the intended
> > recipient, please contact the sender and destroy all copies of the
> > communication.
> > ------------------------------
> > *From:* dutchbeats
> > *To:* xl7@yahoogroups.com
> > *Sent:* Saturday, November 3, 2012 10:51 AM
> > *Subject:* [xl7] sub/mix inputs
> >
> >
> > does anyone use these and is it as a mixer for other gear or to process
> > the cs sounds? i am wondering if the audio coming into the cs via the
> > sub/mix inputs also goes to the spdif out?
> >
> >
> >
> >
> >
>
Attachments
- No local attachments were found for this message.