thanks; i'm wondering if something already made might work too--for example, search ebay under "cisco rack ears," and you will see many ears that have multiple holes already on the ears that might work (with no drilling, cutting, etc.). i think you would need to use two on each side of the command station, and they may not fit PERFECTLY (like they would not be totally flush with the surface face of the emu), but these might work... what do you think? thx... --- In xl7@yahoogroups.com, Nathan Steele <XTCaine303@...> wrote: > > I measured and it looks like you could use 1"x2" aliminum angle > extrusion, cut to length and drilled out in the right places. I have yet > to make mine, but it should work. maybe a little spray paint, or better > yet powder coat.... > On 10/27/2012 2:52 AM, shakerz25 wrote: > > > > Any recent new finds/creations for rack ears? > > > > I recall reading about people considering making some, and/or finding > > some generic rack pieces that could be cut and used with the Command > > Stations... > > > > I'm just looking for a cheap and dirty solution that works... > > > > Thanks! > > > > >
Message
Re: rack ears...?
2012-10-29 by shakerz25