Emu XL-7 & MP-7 User's Group

PS: The PRESET_ARP_PATTERN_ROM_ID is parameter 1042.

--- In xl7@yahoogroups.com, "steve_the_composer" <smw-mail@...> wrote:
>
> Just did a quick test as follows:
> 
> 1. Point parameter edit vale to -1 (edit buffer).
> F0 18 0F 00 55 01 02 01 07 7F 7F F7 
> 
> 2. Change arpeggiator pattern to 06 00.
> F0 18 0F 00 55 01 02 03 08 06 00 F7 
> (Also tried other values.)
> 
> My P2500 performed as expected. I was able to switch arp patterns on the fly for the preset in the edit buffer by sending various sysex commands.
> 
> Hope this helps.
> 
> Steve
> 
> 
> 
> 
> 
> 
> --- In xl7@yahoogroups.com, "steve_the_composer" <smw-mail@> wrote:
> >
> > parameter 897 is PRESET_SELECT. -1 is the edit buffer.
> > parameter 1027 is PRESET_ARP_PATTERN.
> > 
> > I don't have a controller set up to send a stream of sysex, but if I did, to test I would:
> > 1. Select a preexisting arp pattern on the front panel.
> > 2. Via sysex set parameter 897 to -1.
> > 3. Via sysex, send data to parameter 1027.
> > 
> > I am not sure this will let you change patterns on the fly, but this is the first thing I would test to give it a try.
> > 
> > If it works, I would next try changing specific arp presets active on different channels.  And if this works (not sure that it will, but who knows), bear in mind that you just might be changing the preset in memory. So, make sure you test this on backup copies of your presets.
> > 
> > If I get a chance, I will try to simulate this with a sequencer.
> > 
> > Steve
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > --- In xl7@yahoogroups.com, "steve_the_composer" <smw-mail@> wrote:
> > 
> > > I am thinking it also >might< be possible to do a parameter edit via sysex to change the arp pattern. I will have to look that up, though.
> >
>