Emu XL-7 & MP-7 User's Group

Cheers Steve!

So the CS can't send sysex info from it's own knobs? I get midi data flow I just haven't delved into sysex as of yet. I have a BCR laying unused, maybe this will be something to figure out with it...

You're a boss!

--- In xl7@yahoogroups.com, "steve_the_composer" <smw-mail@...> wrote:
>
> Here's the FX table from the sysex manual (v. 2.2) for presets. I am not sure what happens to the audio if these parameters are changed on the fly. (The table in the sysex manual is prettier; Yahoo Groups messages don't do tables well.)
> Steve 
> 
> Parameters ID
> (RESERVED) id = 1152 (00h,09h)
> PRESET_FX_A_ALGORITHM id = 1153 (01h,09h) min = 0; max = 44;
> (0 = Master)
> PRESET_FX_A_DECAY id = 1154 (02h,09h) min = 0; max = 90;
> PRESET_FX_A_HFDAMP id = 1155 (03h,09h) min = 0; max = 127;
> PRESET_FX_A>B id = 1156 (04h,09h) min = 0; max = 127;
> PRESET_FX_A_MIX_MAIN id = 1157 (05h,09h) min = 0; max = 100;
> PRESET_FX_A_MIX_SUB1 id = 1158 (06h,09h) min = 0; max = 100;
> PRESET_FX_A_MIX_SUB2 id = 1159 (07h,09h) min = 0; max = 100;
> PRESET_FX_B_ALGORITHM id = 1160 (08h,09h) min = 0; max = 32;
> (0 = Master)
> PRESET_FX_B_FEEDBACK id = 1161 (09h,09h) min = 0; max = 127;
> PRESET_FX_B_LFO_RATE id = 1162 (0Ah,09h) min = 0; max = 127;
> PRESET_FX_B_DELAY id = 1163 (0Bh,09h) min = 0; max = 127;
> PRESET_FX_B_MIX_MAIN id = 1164 (0Ch,09h) min = 0; max = 100;
> PRESET_FX_B_MIX_SUB1 id = 1165 (0Dh,09h) min = 0; max = 100;
> PRESET_FX_B_MIX_SUB2 id = 1166 (0Eh,09h) min = 0; max = 100;
> PRESET_FX_A_MIX_SUB3 id = 1167 (0Fh,09h) min = 0; max = 100;
> PRESET_FX_B_MIX_SUB4 id = 1168 (10h,09h) min = 0; max = 100;
>