Emu XL-7 & MP-7 User's Group

When I read your post, my first thought was, "Remote control mode."

In addition to using a full-fledged computer for working around problems like this would be to build a microprocessor-based E-Mu remote controller.  

In fact, I can envision something like a midified arduino with a whole mess of buttons to do things remotely with single button presses which send out remote control sysex strings.

just a thought.

Steve



--- In xl7@yahoogroups.com, "coolout1" <coolout1@...> wrote:
>
> I finally figured it out. This could also work for anyone else that gets some completely broken hardware buttons on a command station.
> 
> I used a little app from Bome's to send midi sysex messages to the MP7. Basically putting it into remote control mode, initiating a remote press of the save/copy button, and another sysex command taking it out of remote mode. All I have to do is just open the script and hit send and I CAN NOW SAVE MY PATTERNS!!! 
> 
> I guess I could also use Ableton Live (along with ClyphX) and assign the sysex script to a key on a midi controller or the MP7 itself. The highest key on the keyboard or the touchstrip for instance.   
> 
> Here's a link to the app: 
> http://www.bome.com/products/sendsx/downloads
> 
> Here's the sysex command:
> F0 18 0F 00 55 40 10 F7
> F0 18 0F 00 55 40 20 10 00 01 F7
> F0 18 0F 00 55 40 11 F7
> 
> 
> 
> --- In xl7@yahoogroups.com, "coolout1" <coolout1@> wrote:
> >
> > Anyone? 
> > 
> > I opened my MP-7 up and and tinkered around with the bad button. First I tried to re-solder the button and also soldered some wires as patch points to see if I could just the button to work. No dice...it still doesn't respond at all. I guess I could get a new front panel board from from EPR, but it costs more than what I paid for the unit.
> > 
> > So far the only workaround I see is to sync the MP with a software sequencer, record patterns into it, save them as midi files and then reload them into the MP using E-loader. 
> > 
> > What a creativity killer. I wonder is there a way to send a sysex message or remap a button or key to trigger the save page.
> > 
> > -c
> >   
> > 
> > --- In xl7@yahoogroups.com, "coolout1" <coolout1@> wrote:
> > >
> > > Hey guys,
> > > 
> > > I just bought an MP-7 for pretty cheap. Overall it seems to be in pretty good condition except one big thing. The save/copy button doesn't respond when pressed. The LED still blinks, but it never goes into the save menu. 
> > > 
> > > At first I thought it was a little more loose than some of the other buttons so I popped a brand new replacement in and squirted a little calube mcl in, but that changed nothing. I then ran the panel diagnostic and it still doesn't light up when pressed like the other buttons.
> > > 
> > > I have the editor up and running on my netbook, so I guess I could use that to save, but that kinda defeats the whole purpose of going back to hardware.
> > > 
> > > Am I screwed?
> > >
> >
>