Emu XL-7 & MP-7 User's Group

I just did a simple FX preset template. Having the cords set up like you suggest is indeed fun! I used knobs IJKL for FXA an MNOP for FXB.

Let me add a few tweaks and variations to your excellent suggestion. (I look forward to see variations from others as well.)

1. For the knobs to go from 0 to full [whether its +100 or something lower], I set the FXA/FXB sends to 0%. Baseline FX can be achieved with small values with the FXA/FXB SEND AMOUNTS parameters. I also set the Initial Controller Amount to 000 so I have a consistent starting point.

2. To have FX be subtractive when turning knobs clockwise, I set the patchcord baseline send amount to 100% and the patchcord amount to -100.

Fun stuff for sure!! (Gonna fiddle some more with the corded FX presets.) Thanks for starting the thread.

Steve

--- In xl7@yahoogroups.com, Matt <somatt@...> wrote:
>
> 1) create a new preset name it something like EFX:delay and reverb
> 2) open preset edit and go to cords. turn off all the patch cords in the
> new preset and all preset patch cords.
> 3) under preset patchcords assign the following: #01 midi a -> FXAsend1
> +100, #02 midi b -> FXAsend2, #03 midi C -> FXAsend3, #04 midi D ->
> FXAsend4, #5 midi E -> FXBsend1, #6 midi f -> fxbsend2, #7 midi g ->
> fxbsend3, #8 midi h -> fxbsend4.
> 5) put the effects on Delay and Reverb or whatever effect algorithm you
> want and save the preset.
> 6) put the new preset on channnel 16a or whatever channel u choose to use
> for your fx channel
> 7) go to global and set the FX MODE to enabled
> 8) inside global set FX MULTIMODE CONTROL set the channel to be 16a or
> whatever you chose earlier
> If you point a track at this preset you can now modulate and record your FX
> send amounts.
> Yay!
> 
> matt
> facebook.com/sabotagebeats
> soundcloud.com/sabotage
>