Emu XL-7 & MP-7 User's Group

Steve_the _Composer wrote: "PS: I like to distinguish between 12-controller E-Mu boxes (MidiA --> MidiL) and 16-controller E-Mu boxes (MidiA --> MidiP). This is one 
of several differences between the presets on the different versions of 
the ROM. So, the controller assignments for factory presets should be 
different depending on whther the ROM was designed for a 12-controller 
box or a 16-controller box."

This is a great point. This is basically the P1000/2000 modules and keyboards versus the P2500 Command Module and Command Stations, right?

DF


 
CONFIDENTIALITY NOTICE: This communication with its contents may contain confidential and/or legally privileged information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication.


________________________________
 From: steve_the_composer <smw-mail@...>
To: xl7@yahoogroups.com 
Sent: Tuesday, May 29, 2012 3:56 PM
Subject: [xl7] Re: Substitute Rack for ROM?
 

  
PS: I like to distinguish between 12-controller E-Mu boxes (MidiA --> MidiL) and 16-controller E-Mu boxes (MidiA --> MidiP). This is one of several differences between the presets on the different versions of the ROM. So, the controller assignments for factory presets should be different depending on whther the ROM was designed for a 12-controller box or a 16-controller box.

--- In xl7@yahoogroups.com, "steve_the_composer" <smw-mail@...> wrote:
>
> As others have pointed out, you can indeed use Sound ROMs made for the P2K synth engine in the CS (and P2500) that were originally designed for single rack unit and keyboard variants.
> 
> Also (as pointed out) factory patterns intended for a CS/P2500 ROM will either not sound right, or will not sound at all. These boxes use ROM IDs, Bank numbers, and Preset numbers to point to presets. The factory sequences (indeed all sequences) will have pointers to the ROMs and presets being used. 
> 
> So, if you don't have a ROM installed with the correct ROM ID, you should get no sound. If the ROM ID is the same but the order/numbering of the presets is different, the sequences will play different sounds. 
> 
> You probably could change the presets in the sequences to point to presets for ROMs you do have, but it might be more fun to create your own sequences.
> 
> Hope this helps.
> 
> Steve 
> 
> --- In xl7@yahoogroups.com, "vivaknievel" <jammesluckett@> wrote:
> >
> > Hi, all - I was wondering if it's possible for a Command Station to read a rack version of one of the other ROMs?  The ROMs I'm most interested in are hard to come by, but I see the rack versions they're based upon are plentiful and cheap.  Could I connect, say, an Xtreme Lead-1 to my MP-7, as a "workaround"? 
> > 
> > I use a Mac and Ctrlr crashes on launch, so I wouldn't be able to edit the ROMs, to install in the MP-7. But I wouldn't mind eventually buying multiple racks, if I could somehow chain them to my Command Station and get a poor-man's version of installing extra ROMs.
> > 
> > Thank you!  - Jammes
> >
>