Emu XL-7 & MP-7 User's Group

When you boot the box, it should say something like Ver. 2.00 for OS 2.0 during the booting process. You shouldn't have to guess.

Some diagnostic questions (issue 1):
1. Is it the same sound that's triggering no matter what preset is being used?
2. Is the sound triggering from the sub outs as well as the main outs?
3. Does increasing the tempo increase the frequency of the extraneous sound?

As for issue 2, it is odd that the XL-7 ROM would not show up. What are the ROM IDs of all the ROMS. (Quick way to find ROM ID: hit audition; MSB is ROM ID.)

Maybe others have run into these problems and can make specific suggestions.

Steve

--- In xl7@yahoogroups.com, "CaseyG" <tricmagazine@...> wrote:
>
> Hello,
> 
> I've had an XL-7 for a couple years with the standard SIMM ("XL7"), and I just bought a PX-7 with standard SIMM ("DRUM") plus the Vintage/Classic Keys SIMM ("VROM"). Both run OS 2.00 as far as I can tell.  Both standard SIMMs are fine, however, here are my two dilemas:
> 
> 1) When the "VROM" SIMM is in the PX-7 box, it makes this harsh cycling effect (it's either like a filter sweep or distortion every few seconds).  I was thinking the previous owner hit some setting by accident but I've checked everywhere.  I'm also thinking it may have to do with the subtle software difference in the PX-7 since it's the "drum edition".  The VROM sounds great in the XL-7 box, which leads to the other issue.
> 
> 2) No matter what configuration I try, if I try to use mix and match other SIMMs with the standard XL7 SIMM, the "XL7" SIMM doesn't show up when I boot. Like if I try to load XL7 and VROM in either box, I only get VROM.
> 
> Any advice on either issue would be a serious help.  Thanks in advance!
>