Duh! Brain freeze. I'd read that subs are only active if cables are plugged in ... but forgot. So I guess the way to go is to setup user presets for the presets you want to use this way. I think I see the way. Thank a lot! DF CONFIDENTIALITY NOTICE: This communication with its contents may contain confidential and/or legally privileged information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication. ________________________________ From: iiniihii9 <nerminh9@gmail.com> To: xl7@yahoogroups.com Sent: Saturday, April 21, 2012 1:19 PM Subject: [xl7] Re: Using the sub outs? You need to have cables plugged into subs in order for unit to send to subs or to recognize that output. If cables are not in, you'll only have mains available to send to... It should say send2-sub1... I think it's track 10 in preset mode. It is related to preset used... Hope that helps... --- In xl7@yahoogroups.com, D F Tweedie <bienpegaito@...> wrote: > > Hmmm .... I couldn't figure out which parameter changed the outputs. > > Just to clarify, this method is related to the preset used, not the track assigned, correct? > > DF > >  > CONFIDENTIALITY NOTICE: This communication with its contents may contain confidential and/or legally privileged information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication. > > > ________________________________ > From: D F Tweedie <bienpegaito@...> > To: "xl7@yahoogroups.com" <xl7@yahoogroups.com> > Sent: Saturday, April 21, 2012 12:42 PM > Subject: Re: [xl7] Re: Using the sub outs? > > >  >  > CONFIDENTIALITY NOTICE: This communication with its contents may contain confidential and/or legally privileged information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication. > > > ________________________________ > From: iiniihii9 <nerminh9@...> > To: xl7@yahoogroups.com > Sent: Saturday, April 21, 2012 12:21 PM > Subject: [xl7] Re: Using the sub outs? > > Cool! Just found it. (Steve, it's button #10). > > DF > > >  > > > 1. You go into preset mode and you press bend/output shortcut button on tracks. From there you choose main or subs. > > 2. Yes you can easily do that with amp as far as panning goes and use #1. method to send to subs. > > 3. Not sure on that one... > > Basically, all the layer/voice panning and output assignment is located in the preset mode. 4 leyers per preset. Each layer can be sent to whatever output. Each channel can have it's own preset and each track can be assigned to any channel. >
Message
Re: [xl7] Re: Using the sub outs?
2012-04-21 by D F Tweedie