I think I rather quit using ableton than quit using CS maybe I am crazy...
On Aug 17, 2011 12:02 PM, "splattabreakz" <s_o_m_9000@hotmail.com> wrote:
> Just to check, when you say you haven't had this problem before, was that with Ableton? So you've had Ableton synced with other devices fine?
>
> I actually just checked the Ableton forum and apparently the latest version addresses the Ableton as slave sync issue. I haven't tried it yet so can't tell you if it works. There is a thread about it though, so maybe there's something useful: http://forum.ableton.com/viewtopic.php?f=1&t=165235
>
> --- In xl7@yahoogroups.com, John Vokoun wrote:
>>
>> I just picked up an XL-7... I have the same clock 'drift' issues when Ableton is set as Slave. I have not had this problem with other midi devices set as master, sending master clock, just the XL-7. I have been using my gear in a serial midi loop, through a midiman 1x1. I just ordered a MOTU timepiece A/V to see if it can fix the clock issue. I would be happy to let you know my results in about a week.
>>
>> good luck!
>>
>>
>>
>> ________________________________
>> From: splattabreakz
>> To: xl7@yahoogroups.com
>> Sent: Wednesday, August 17, 2011 12:47 PM
>> Subject: [xl7] Re: FS: Pristine XL-7 in the UK
>>
>>
>> Â
>> yeah, see, this is a problem. i would prefer to avoid warping in ableton because it introduces artifacts.
>>
>> --- In xl7@yahoogroups.com, Matt wrote:
>> >
>> > I use px7 for master. Clock a little jumpy but works ok. I Need to manually
>> > warp clips after recording because of latency though.
>> > On Aug 16, 2011 11:19 PM, "nikitsanpsix" wrote:
>> > >
>> > > I have the same setup. XL-7 + Ableton.
>> > > XL-7 as a master sequencer.
>> > > All work Ok for me.
>> > >
>> >
>>
>
>
> Just to check, when you say you haven't had this problem before, was that with Ableton? So you've had Ableton synced with other devices fine?
>
> I actually just checked the Ableton forum and apparently the latest version addresses the Ableton as slave sync issue. I haven't tried it yet so can't tell you if it works. There is a thread about it though, so maybe there's something useful: http://forum.ableton.com/viewtopic.php?f=1&t=165235
>
> --- In xl7@yahoogroups.com, John Vokoun wrote:
>>
>> I just picked up an XL-7... I have the same clock 'drift' issues when Ableton is set as Slave. I have not had this problem with other midi devices set as master, sending master clock, just the XL-7. I have been using my gear in a serial midi loop, through a midiman 1x1. I just ordered a MOTU timepiece A/V to see if it can fix the clock issue. I would be happy to let you know my results in about a week.
>>
>> good luck!
>>
>>
>>
>> ________________________________
>> From: splattabreakz
>> To: xl7@yahoogroups.com
>> Sent: Wednesday, August 17, 2011 12:47 PM
>> Subject: [xl7] Re: FS: Pristine XL-7 in the UK
>>
>>
>> Â
>> yeah, see, this is a problem. i would prefer to avoid warping in ableton because it introduces artifacts.
>>
>> --- In xl7@yahoogroups.com, Matt wrote:
>> >
>> > I use px7 for master. Clock a little jumpy but works ok. I Need to manually
>> > warp clips after recording because of latency though.
>> > On Aug 16, 2011 11:19 PM, "nikitsanpsix" wrote:
>> > >
>> > > I have the same setup. XL-7 + Ableton.
>> > > XL-7 as a master sequencer.
>> > > All work Ok for me.
>> > >
>> >
>>
>
>