...but as i said before i am not an electrician i need detailed instructions... I checked Powdec but no similar power supply there... So there is not one similar power supply on the market right now? Hmmm... If there is no similar one available i would go for the PC PSU just to try if the XL7 works again . 5V 12V -12V and 3.3V are no prob but what about the 2.75V or the 10V? --- In xl7@yahoogroups.com, Greg W <greg4ww@...> wrote: > > I posted this before > > After frying a cs pwr sup, as they do run very HOT > I put a comp fan with holes on the base of my cs > > Runs way coooler > > > > > ________________________________ > From: Bob S. <tttsystems@...> > To: xl7@yahoogroups.com > Sent: Wed, 15 June, 2011 1:14:26 PM > Subject: Re: [xl7] Re: Power Supply for Command Station > > > A PC power supply requires forced air cooling, a fan to blow air over the heat > sinks. There is no outside air inlet on a CS. > > Bob > El Segundo, CA > > > > ----- Original Message ----- > From: lz303 > >To: xl7@...m > >Sent: Wednesday, June 15, 2011 12:41 > >Subject: [xl7] Re: Power Supply for Command Station > > > > > >EPR says _ Out of stock > > > >A pc power supply? If that works i also take a pc power supply but i have to > >say that i am not an electrician :) > > > >I can measure and do little repairs if i have a detailed manual :) > > > >I know that a PC power supply has +12V and 4V? > > > >Can you explain to me what i have to do? > > > >Thanks... > > > >--- In xl7@yahoogroups.com, Matt <somatt@> wrote: > >> > >> Epr electronics. Or can you use a pc power supply? > >> > >> On Jun 15, 2011 12:03 PM, "lz303" <lz303@> wrote: > >> > >> > >> > >> Hi, > >> > >> my XL7 just broke down. No power anymore. > >> > >> Checked the power supply and only the green and the purple cable have 9V > >and > >> 2.95V. The rest is dead. > >> > >> Does anyone know where i can get a new one or otherwise a similar power > >> supply? > >> > >> Thanks > >> > > > > >
Message
Re: Power Supply for Command Station
2011-06-16 by lz303
Attachments
- No local attachments were found for this message.