Emu XL-7 & MP-7 User's Group

I posted this before

After frying a cs pwr sup, as they do run very HOT 
I put a comp fan with holes on the base of my cs

Runs way coooler




________________________________
From: Bob S. <tttsystems@...>
To: xl7@yahoogroups.com
Sent: Wed, 15 June, 2011 1:14:26 PM
Subject: Re: [xl7] Re: Power Supply for Command Station

  
A PC power supply requires forced air  cooling, a fan to blow air over the heat 
sinks.  There is no outside air  inlet on a CS.
 
Bob
El Segundo, CA
 
 
 
----- Original Message ----- 
From: lz303 
>To: xl7@yahoogroups.com 
>Sent: Wednesday, June 15, 2011  12:41
>Subject: [xl7] Re: Power Supply for    Command Station
>
>  
>EPR says _ Out of stock
>
>A pc power supply? If that works i also take    a pc power supply but i have to 
>say that i am not an electrician :)
>
>I    can measure and do little repairs if i have a detailed manual :)
>
>I know    that a PC power supply has +12V and 4V?
>
>Can you explain to me what i    have to do?
>
>Thanks...
>
>--- In xl7@yahoogroups.com, Matt    <somatt@...> wrote:
>>
>> Epr electronics. Or can you use a pc    power supply?
>> 
>> On Jun 15, 2011 12:03 PM, "lz303"    <lz303@...> wrote:
>> 
>> 
>> 
>> Hi,
>> 
>> my XL7 just broke down. No power anymore.
>> 
>> Checked    the power supply and only the green and the purple cable have 9V 
>and
>>    2.95V. The rest is dead.
>> 
>> Does anyone know where i can get a    new one or otherwise a similar power
>> supply?
>> 
>>    Thanks
>>
>
>