Emu XL-7 & MP-7 User's Group

Hi - thanks for the info.

I made an heroic attempt last week to compile the Prodatum 0.41 source for Win7. I failed. 
Instructions here if there are any coders about - http://prodatum.sourceforge.net/doc/build.html

Life goes on  - I'll stick with Proteum for now - it's more stable and I'm familiar with it's quirks at this stage :)



--- In xl7@yahoogroups.com, "steve_the_composer" <smw-mail@...> wrote:
>
> As promised, I did some quick tests and was not able to duplicate the wipe out problem in Prodatum. So I went back and found the write-up on this issue.
> 
> http://launch.groups.yahoo.com/group/xl7/message/20136
> 
> I am not sure I will be able to duplicate these tests this weekend on the latest version of Prodatum.
> 
> However, I did notice yesterday and today that after changing the virtual Master Volume knob, sound stops on my P2500 until such time that I change the Master Volume by hand. I am not sure what';s going on there, or if it is unique to my setup.
> 
> Finally, I did test channel switching (selecting each of the channels) to see if that would trigger a crash. On Prodatum 0.38, a crash was triggered once followed by 3 succesful tests. On Prodatum 0.41, I was able to select each of the channels 3 times with no crash.
> 
> Steve 
> 
> 
> 
> --- In xl7@yahoogroups.com, "steve_the_composer" <smw-mail@> wrote:
> >
> > I don't use the editors very much, but over the past few days I have been using them a little. I did not had problems with Proteum. In fact, I don't recall any having problems with it over the years--other than when I was doing some testing of new features being worked on a few years ago.
> > 
> > I also used Prodatum yesterday without it crashing. I believe it may still have a very nasty design problem when it boots--wiping out the last state settings that were in effect at power down. (Under OS2.0 The CS/P2500 saves some last state info and restores it upon power up.) I will run some tests shortly to see if this still happens.
> > 
> > Steve  
> >
>