Emu XL-7 & MP-7 User's Group

pardon my newbieishness, if this is a way of getting a hold of more rom sounds on my px-7 (currently with the single rom chip) i am interested.....

--- In xl7@yahoogroups.com, Jeremy Bolton <jboltnz@...> wrote:
>
> Hi,
> 
> This sounds awesome. One please- maybe a couple of the Flash roms
> 
> Good Luck
> 
> Jeremy
> 
> On 19 December 2010 02:34, gary higgins <heyrag@...> wrote:
> 
> >
> >
> > My response would be....Who would *not* be interested if this were
> > truly available...
> >
> >
> > ----- dans party <danielcomiskey@...> wrote:
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> >
> > >
> >
> > >
> >
> > >
> >
> >
> >
> > --- On *Sat, 5/1/80, Ivan Chaparro <jibarosoul@...>* wrote:
> >
> >
> > From: Ivan Chaparro <jibarosoul@...>
> > Subject: Re: [xl7] Re: FLASH SIMM
> > To: xl7@yahoogroups.com
> > Received: Saturday, 5 January, 1980, 8:37 AM
> >
> >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> >
> > >
> >
> > >
> >
> > >
> >
> >
> >
> > >
> >
> > >
> >
> > >
> > Im in, just wondering if you could clarify how this
> >
> > > would integrate into a maxed out command station. Eg: all four roms
> > filled will
> >
> > > i have to sacrifice one? will it just pop into one of the existing
> >
> > > slots?
> >
> >
> > >
> >
> >
> >
> > >
> > ----- Original Message -----
> >
> >
> > >
> > *From:*
> >
> > >Geert <http://mc/compose?to=geert_depuydt@...>
> >
> >
> > >
> > *To:*xl7@yahoogroups. com <http://mc/compose?to=xl7@yahoogroups.com>
> >
> >
> > >
> > *Sent:* Tuesday, February 16, 2010 9:47
> >
> > >   AM
> >
> >
> > >
> > *Subject:* [xl7] Re: FLASH SIMM
> >
> >
> > >
> >
> >
> > >
> >
> >
> > >
> >
> > definately in.
> >
> > --- In xl7@yahoogroups. com <http://mc/compose?to=xl7@yahoogroups.com>,
> > Jack Pratt
> >
> > >   <woodsworth1@ ...> wrote:
> > >
> > > Howdy.
> > >
> > > I
> >
> > >   have created a schematic for a FLASH SIMM. I can send a copy to anyone
> >
> > >   who is sufficiently interested (rather than posting it to everyone
> > [which
> >
> > >   I thought would be bad etiquette]) - so pm me if you want to see it.
> > >
> >
> > >
> > > This FLASH SIMM is not the same as DRAM SIMM mentioned previously,
> >
> > >   but has some similar features. The intention is to have two 1Gb FLASH
> > devices
> >
> > >   populated (total of 256MB FLASH) which would allow as many as seven
> > 32+4MB
> >
> > >   images [32MB = wave memory, 4MB preset memory].
> > >
> > > What The SIMM
> >
> > >   is does mirrors up to four slots - it is actually in one slot but
> >
> > >   can respond to requests for any of the slots, but you can turn 'off'
> > that
> >
> > >   response so you can put a physical ROM (or other FLASH) in that slot.
> > Of cours
> >
> > >   that only accounts for 4 ROM images, the other may be accessed by
> > either a
> >
> > >   switch or possibly in the future the OS could be modified so that there
> > would
> >
> > >   be a menu item that allows the user to select which image appears in
> > any
> >
> > >   given slot. The SIMM has 4 footprints for FLASH devices and if Numonyx
> > every
> >
> > >   release a 2Gb part then the SIMM could support 1GB of FLASH or 28
> > images.
> >
> > >   I'm not planning on altering the OS in the near future so don't hold
> >
> > >   your breath.
> > >
> > > Unfortunately this FLASH SIMM will probably not
> >
> > >   be programmable in the old way [Ultra for wave memory, Proteus for
> > preset
> >
> > >   memory] so I need to also produce another board to read and write the
> > board.
> >
> > >   This solution would be cheaper than buying an Ultra sampler but it
> > wouldn't be
> >
> > >   a sampler!
> > >
> > > In order to proceed I need to know if anyone is
> >
> > >   interested in this SIMM. Cost would be about USD150 for the SIMM, and
> > about
> >
> > >   USD125 for the programmer. Not sure on the exact prices because it will
> > depend
> >
> > >   on the PCB manufacture cost, but I figure I need to sell about 20 of
> > them to
> >
> > >   make it worth while. Not asking for money, but just a show of
> >
> > >   hands.
> > >
> > > Let me know what you think.
> > >
> >
> >
> >
> > >
> >
> >
> >
> > >
> >
> > >
> >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> >
> >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> > >
> >
> >  
> >
>