Yahoo Groups archive

Emu XL-7 & MP-7 User's Group

Archive for xl7.

Index last updated: 2026-03-30 01:19 UTC

Message

Re: [p2k] Re: [xl7] A challenge, a patch, a question...

2010-12-27 by Bruno Kopias-Czekay

�27-12-2010 o godz. 07:20 Atom Smasher <atom@...> napisał(a):

�

On Sun, 26 Dec 2010, Bruno wrote:

> To explain it a bit: let's say I play C1, G1, Bb1 and D2 notes, I set
> arp to 1/16 and "forward assign" and I would like to hear two 1/32 for
> D2 (instead of 1/16).
==========================

program it as a user arp pattern. then just press C1 and enjoy. or....

That was only an example :) generally I would like to have the fourth note divided. So the structure of the chord is not determined.


> So I thought it would be a nice idea to retrigger the amplitude envelope
> - and then I wanted to do this for filter envelope as well. I thought
> about doing this from LFO. I ended up using 25% pulse through FlipFlop
> sent to AEnvTrig.
====================

that gives me another idea... retriggering will have mixed results
depending on the "instrument" (aka "sample") and mixed results in any

True. But in case of typical synth sounds rettiggering both EGs (amp & filter) usually does the trick.

The only thing I overlooked was the fact that LFO runs from the beginning for every note :) however second LFO can modulate the amount of the first one... Work in progress!

case, but you may be able to do this... if your patch uses one or two
layers, you can copy it/them to unused layer(s) and set the "delay"
(bottom of page 216, XL7-OpMan-G.pdf) and set the layer's keyboard range
to be only D2. this will give you a second trigger of the sound, but only
when played on D2.

Thanks, that sounds interesting. While I'm not interested specifically in D2, I can say that only relatively high-pitch notes should be repeated, so it also solves my problem.

Atom, could you please affirmate or negate the presence of FEnvTrig in your modulation destinations?

Thanks for feedback,
Bruno

Attachments