Emu XL-7 & MP-7 User's Group

 

Glad to hear it works--somewhat. Since I don't have any of those ROMS or a CS, I am not sure I can figure out what's going on. If pads trigger beats, I am not sure why the buttons don't. Perhaps the riffs are in a different order on the two ROMs and the preset is pointing to a non-bts riff. (But then the pads shouldn't trigger beats.) If I had the roms, I would examine what's going on in edit mode and also check global settings. I think that's about all I can suggest at this point.
--Steve
Oh, it might be a good idea to compare resources in the two roms (ROM instruments, riffs, arps, etc.).

--- In xl7@yahoogroups.com, Elektrofunkenstein wrote:
>

> Wow that was fast Steve. And it's alive! :)
>
> I have some notes though. I went trough the whole bank and noticed that:
>
> - all Beat Mode presets work from pads only. Trigger buttons or audition
> button don't do anything except one repated note. I really wish it could be
> triggered as with other bts presets on other roms
> - preset 045 bts:Mo n' Mo doesn't work at all and it shows "ROM ???? (not
> installed)" in instrument menu
> - preset 046 must be missing cause nothing was uploaded
>
> ID 15 in the banks uploaded would suggest it was converted to use in MP-7 I
> guess.
>
> Thanks again!
>
>

> On 17 September 2010 00:47, steve_the_composer wrote:
>
> >
> >
> > I took MROM-4 and converted it to use ROM_ID 13 in all places where ROM_ID
> > occurs (including arp pattern). However, it was odd: I checked a few banks
> > in all three sets you uploaded and they all showed up as having ROM_ID 15. I
> > am not sure why.
> >
> > Please let me know if there are any problems with MROM-4 (13), or if if it
> > works the way you wanted.
> >
> >
> > --Steve
> >

> > --- In xl7@yahoogroups.com 40yahoogroups.com>, Elektrofunkenstein
> > > > >
> > > You are da man Steve.
> > > I have uploaded 3 preset banks that share the same Pure Phatt instruments
> > to
> > > this folder:
> > >
> > http://launch.groups.yahoo.com/group/xl7/files/Command%20Station%20Data/Banks%20Dumps/
> > >
> > > And, we have this rom: PHATT 9062 Pure Phatt [Mo'Phatt] expansion
> > EMUROM13,
> > > and we want 1 bank conversion from: MROM1 xxxx Pure Phatt [MK-6]
> > expansion
> > > EMUROM19
> > >
> > > The file we are interested in is MROM-4.syx, and is packed in: 19 - Pure
> > > PHATT (MK-6).rar<
> > http://f1.grp.yahoofs.com/v1/8DCSTJwVqxTIIhv-PiZsmxIp3Yg9Z46_Z643Oh42sKX08FmT86Q-vVr6_vwjc-Or2c2utiQ0_54QfgQ0cPdUjplW6pSTPH50/Command%20Station%20Data/Banks%20Dumps/19%20-%20Pure%20PHATT%20%28MK-6%29.rar
> > >
> >
> > > :
> > > So, source ID is 19 and target ID is 13. When I send it via Midi OX it
> > saves
>; > > it USER bank 0, andt the first preset is bts:Plinky.
> > > Hope this is clear. Ah yea, arps would be nice to:)
> > >
> > > thanks Steve!
> > >
> > >
> > > On 16 September 2010 01:07, steve_the_composer wrote:
> > >
> > > >
> > > >
> > > > PS: If you upload the 5th bank of the MK6 ROM, I can convert it if you
> > tell
> > > > me the target ROM_ID. It will go back to the same user bank you use to
>; > do
> > > > the dump. I assume you want the arp ROM_IDs to be the same as the
> > target
> > > > ROM. I can do that now on this PC. If you want me to set them to 0, I
> > will
> > > > have to dig out the most recent version. (Or you can wait until I have
> > 0.004
> > > > in a more user-friendly state.)
> > > >
> > > > --Steve
> > > >

> > > > --- In xl7@yahoogroups.com 40yahoogroups.com>
> > 40yahoogroups.com>, Elektrofunkenstein
> >
> > > > wrote:
> > > >
> > > > [snip]
> > > >
> > > >
> > > > > I want to change ID's from MK-6
> > > > > presets, the 5th bank to make it play on Pure Phatt rom. I didn't
> > find
> > > > this
> > > > > conversion anywhere. Where can I download the newest one?
> > > >
>; > > >
> > > >
> > >
> >
> >
> >
>