sure but it wont boot. how would I reinstall? On Oct 29, 2009, at 8:02 PM, Jack Pratt wrote: > > Perhaps the first line of attack should be to reinstall the system > software (incase it failed to load properly last time resulting in > the behaviour you see). That shouldn't take long may distinguish > between a hardware and a software problem... > > From: Ivan Chaparro <jibarosoul@...> > To: xl7@yahoogroups.com > Sent: Fri, October 30, 2009 10:39:35 AM > Subject: Re: [xl7] MP-7 Locked up? > > > did that, I guess I could swap parts was hoping for a less invasive > solution. > On Oct 29, 2009, at 7:23 PM, Atom Smasher wrote: > >> >> On Thu, 29 Oct 2009, Ivan Chaparro wrote: >> >> > Just purchased an MP-7 used for parts and was surprised at how >> good the >> > condition was. The issue is that it does not boot fully. At power >> up the >> > unit lights up all buttons and display but stays lit with a black >> bar >> > across display. Opened up and secured all ribbon connectors and >> checked >> > fuse, no luck. Also will not respond to the diagnostic boot up. Any >> > idea? >> ============ = >> >> re-seat the chips? >> >> failing that, swap out parts with a good unit until you can isolate >> a bad >> part. >> >> -- >> ...atom >> >> ____________ _________ ___ >> http://atom. smasher.org/ >> 762A 3B98 A3C3 96C9 C6B7 582A B88D 52E4 D9F5 7808 >> ------------ --------- --------- --------- --------- - >> >> "Never have the armies of the North brought peace, >> prosperity, or democracy to the peoples of Asia, >> Africa, or Latin America. In the future, as in the >> past five centuries, they can only bring to these >> peoples further servitude, the exploitation of their >> labor, the expropriation of their riches, and the denial >> of their rights. It is of the utmost importance that the >> progressive forces of the West understand this." >> -- Samir Amin, >> director of Forum du Tiers Monde in Dakar, Senegal >> >> > > = > > >
Message
Re: [xl7] MP-7 Locked up?
2009-10-30 by Ivan Chaparro