To: xl7@yahoogroups.com
Sent: Fri, October 30, 2009 10:39:35 AM
Subject: Re: [xl7] MP-7 Locked up?
did that, I guess I could swap parts was hoping for a less invasive solution.
On Thu, 29 Oct 2009, Ivan Chaparro wrote:
> Just purchased an MP-7 used for parts and was surprised at how good the
> condition was. The issue is that it does not boot fully. At power up the
> unit lights up all buttons and display but stays lit with a black bar
> across display. Opened up and secured all ribbon connectors and checked
> fuse, no luck. Also will not respond to the diagnostic boot up. Any
> idea?
============ =
re-seat the chips?
failing that, swap out parts with a good unit until you can isolate a bad
part.
--
...atom
____________ _________ ___
http://atom. smasher.org/
762A 3B98 A3C3 96C9 C6B7 582A B88D 52E4 D9F5 7808
------------ --------- --------- --------- --------- -
"Never have the armies of the North brought peace,
prosperity, or democracy to the peoples of Asia,
Africa, or Latin America. In the future, as in the
past five centuries, they can only bring to these
peoples further servitude, the exploitation of their
labor, the expropriation of their riches, and the denial
of their rights. It is of the utmost importance that the
progressive forces of the West understand this."
-- Samir Amin,
director of Forum du Tiers Monde in Dakar, Senegal
=