Best thing to do probably is to connect the OUT from the EPS to the IN on the XL-7. Then connect one of the OUTs from the XL-7 to the IN on the Micro-Q. If you also want to control the EPS with XL-7 you could simply connect the other OUT to the IN on the EPS. Or alternatively the THRU from the Micro-Q to the IN on the EPS.
You might want to turn the 'LOCAL' keyboard setting on the EPS to OFF if you don't want it to always play from it's keyboard unless you have selected an appropriate channel on the XL-7. That way it can act as a controller and also be controlled from the XL-7. If you select a channel on the XL-7 that the EPS is set to recognise, it will play.
Hope that makes some sense to ya.
Massimo
--- On Sat, 25/7/09, sdorange wrote:
From: sdorange
Subject: [xl7] XL-7 newbie question - connecting to keyboard + rack synth
To: xl7@yahoogroups.com
Date: Saturday, 25 July, 2009, 6:47 AMI'm just getting started with the XL-7 and want to use it to generate beats as well as sequence a Waldorf Micro Q (rack), which is connected to an Ensoniq EPS keyboard.
Can I control the Micro Q using the Command Station, and still use the keyboard to play the Micro Q? I'm going around in circles trying to figure this out.
Many thanks!
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/xl7/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/xl7/join
(Yahoo! ID required)
<*> To change settings via email:
; mailto:xl7-digest@yahoogroups.com
mailto:xl7-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
xl7-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/