Emu XL-7 & MP-7 User's Group

he110 group-
thanx for this resource.
I would like to use int. seq. and send same notes to ext. source with 
prog. change.is that possible?

from what I understand- i may need to dedicate 1(or more) of the 
sixteen tracks
to ONLY send prog. change or note on/off? (need on/off on a track for 
midi mixer and lights)(need prog change for external synth to double 
xl7 internal)

this info below that Aaron provided about "multi" may be the key i'm 
missing....but i also thought there was something about not being 
able to transmit prog. change out either midi A/B.

I try to keep up on posts(alot of great info) and i have been 
scouring the manual(with about 12 other manuals) trying to wrap my 
head around all the midi implementation.
so many menu options in xl7 - i may be chasing my tail. :] 

> Also, remember that none of the sequencer tracks target any of
the 'B' channels. If you're trying to sequence more than 16 channels,
you'll need to set (at least) one track to be a "Multi" track - near
the end of the Pattern screen. If you're just trying to use different
channels (less than 16 unique, even if they're B channels), go to the
same routing screen and just pick 1B (or whatever channel(s) you'd
like). Finally, remember that you need to have note data recorded on
the track for it to save preset info...
>
> -Aaron

Love this machine!
I have xl7 with stock card/proteus/TSCY/ensonique card
and for years i have only been using it to write drum/synth sequences.
Then i solo each track and record audio into Nuendo software to 
manipulate and add git/bass/vox/synth.
I am finally going to unleash the power and get the most out of this 
machine with my hardware setup.
XL7/ ES-1 / EA-1 / MVS-1 / K-station / Six-Track / Matrix6 / JX3P /
GR-700 / MM-1 midi mixer / MX8 midi router

thanx for any help and reading long post.
best-
Mach
www.machfox.com