All those words hurt my head...I'm going to have to read this a few times over to see where you are.... Bob El Segundo, CA -----Original Message----- >From: Andrew <Alan_mansfield@...> >Sent: Oct 2, 2008 4:52 PM >To: xl7@yahoogroups.com >Subject: [xl7] What am I doing wrong with the efx? > > >It's my understanding that the effects on the XL-7 can either be used on only 1 preset, using the effects setting stored in that preset... or set up to run the same effects setting on every midi channel, using the 4 sends to control the amount of effect applied to each send, as well as selecting which output that send is routed to... or bypassed all together. When I bypass the effects, as expected, there are no effects... cool. However when I try to only run effects on one preset, I end up hearing that presets stored effects setting on every channels preset... and whenever I set it up to apply its effects to all presets through the sends, it works pretty much the way I think it should, except that whatever I set to sends 2 and 3 (sub mix 1 and 2) also shows up at the main output, even with those send levels all set to 0. I guess what I'm trying to accomplish is, if I set it up to only run its effects on one preset, that the effects only appear on that preset, and not on all of them... or if I set it up to apply its effects to everything through the sends, that whatever I route to sends 2 and 3 will only out-put the dry audio at the 2 sub-mixes if I set their send levels to 0. Any ideas? > >Andrew > >_________________________________________________________________ >Stay up to date on your PC, the Web, and your mobile phone with Windows Live. >http://clk.atdmt.com/MRT/go/msnnkwxp1020093185mrt/direct/01/ > >[Non-text portions of this message have been removed] >
Message
Re: [xl7] What am I doing wrong with the efx?
2008-10-02 by Bob S.