Emu XL-7 & MP-7 User's Group

I think I found a solution. I made a duplicate track with the arp set
to on and I just mute and unmute whenever the break comes. Which
brings me to my next question:

In song mode I lay down a bunch of the same pattern and go through
after in real-time record and mute and unmute tracks on the fly,
however, each time the pattern loops all of the original mute/unmute
track settings are returned! how can I work around this?

PS - I checked the manual and the external cc for arp is 80: 0=off,
1=on, 2=preset, 3=master

Cheers





--- In xl7@yahoogroups.com, "dutchbeats" <dutchbeats@...> wrote:
>
> Thanks Keith! I was able to use the Preset Patch Cords to turn on/off
> the arp but realized I will have to make a duplicate track just for
> the arp since I can only either hear the track with the arp on or not
> hear the track at all. I want to hear the track with no arp and then
> bring in the arp now and then. More questions coming soon! 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> --- In xl7@yahoogroups.com, "Keith Young" <emigr8@> wrote:
> >
> > Off the top of my head, yo could set up a contoller to control the
Arp 
> > Velocity. In the Preset Patch cords, Midi K is probably
controlling the 
> > Arp Velocity and is set to a value of 100. If you make it -100, then 
> > with Midi K in the zero (default) position you get the full Arp
and in 
> > the max position you get no Arp.
> > Regards,
> > Keith
> > 
> > --- In xl7@yahoogroups.com, "dutchbeats" <dutchbeats@> wrote:
> > >
> > > Hey all, I tried to record myself turning the arp on/off into my
songs
> > > but not go. I just want it to arpeggiate when the breakdown
comes and
> > > then shut of and maybe add it a few other times in the song
also. How
> > > can I do this?
> > >
> >
>