Emu XL-7 & MP-7 User's Group

Thanks.. I will try this out tonight

steve_the_composer <smw-mail@...> wrote:          > On 15/08/06, Shane <lvrshn@...> wrote:
> > 1. Can someone walk me through by using a midi controller for 
just recording the bass parts on the XL-7? I use the pads on the 
Command Station for Drums but I would like to use a keyboard for the 
bass parts, and when I do I get the wrong bass sound that I wanted, 
is there any thing I need to turn off in the midi section?

It sounds like you successfully have the controller routed to the XL-
7. Now, make sure your controller is transmitting on the same midi 
channel you have the bass preset. For example, if bas.MyBass is on 
C03A, make sure the controller is transmitting on midi channel 3. 
Also, make sure rechannelize if off. (I assume you are already in 
multitimbral mode.)

And if for some reason, your controller is sending out a program 
change message, you can turn RECCEIVE PROGRAM CHANGE for that 
channel to off.

> > 2. Can the Emu control my eq parameters in Sonar 5, by using 
the 16 knobs on the Command Station? I just get tired of turning the 
knobs with my mouse

In Sonar 3, I played around with Control Surfaces. I assume Sonar 5 
still has them. Follow the tutorial on how to set up a control 
surface. Basically, this feature is designed so you can use your 
controller to control what Sonar does. 

NOTE:
I am not sure if Sonar's eq is mappable via control surfaces, though.

In case Sonar 5 is similar, here are the steps in Sonar 3:
1. Select Options | Control Surfaces
2. Insert a new control surface [in Sonar 3, its the button with a 
yellow star].
3. In the Settings dialog, select Cakewalk Generic Surface [unless 
someone has already designed one for the E-MU Command Station] and 
the midi port where the XL-7 midi out is connected.
4. In Sonar 3, I then go to Tools and select the Cakewalk Generic 
Surface. [Perhaps Cakewalk put all these in one spot in later 
editions, so check the Cakewalk help system.]
5. A multifacted Cakewalk Generic Surface window [or counterpart] 
should pop up. Here's where you map your XL-7 knobs to Sonar 
function. (Make sure KNOBS OUTPUT MIDI is set to >>transmit<<.)

NOTE: In Sonar 3, I cannot find any mappable eq parameters. You 
might want to check out the discussion boards at cakewalk. Let me 
know what you find; maybe I will save up for an upgrade.

Hope this helps.

--Steve



         


Music is a moral law, 
it gives wings to the mind, a soul to the universe 
flight to the imagination, a charm to sadness 
a life to everything, 
Plato, 400 B.C
 		
---------------------------------
Stay in the know. Pulse on the new Yahoo.com.  Check it out. 

[Non-text portions of this message have been removed]