Emu XL-7 & MP-7 User's Group

--- In xl7@yahoogroups.com, "steve_the_composer" <smw-mail@...> 
wrote:
>
> Forget what I said about setting channel assign to MultiA or 
MultiB.
> 
> Instead, here are the steps I used to record the beats riff to a 
> pattern. (I used T01 to record the note data, with Triggers from 
the 
> Basic Channel and Beats on Channel 16B. There are probably many 
otehr 
> ways to do this; this is just the one I used.)
> 
> A. SETUP WIRING [hardwiring and softwiring]:
> 1. Hardwiring: MIDI B OUT to MIDI IN.
> 
> 2. Softwiring: Set MIDI IN CHANNELS 1 to 16: to A.
> (MIDI menu systen)
> 
> B. SETUP PERFORMANCE FUNCTIONS:
> 1. Set TRIGGER BUTTONS FUNCTION to Play Beats Parts.
> (Controller menu system)
> 
> 2. Set RECHANNELIZE INPUT to Off. {not sure if this makes a 
difference)
> (MIDI menu system)
> 
> 3. Set ARP/RIFF MIDI OUT to Transmit Riffs
> (Arp menu system)
> 
> 4. Set BtsCh to 16B; Set TrigCh to Basic
> (BEATS MODE menu in Arp menu system)
> 
> 5. Set C16B to the bts.preset of my choice.
> 
> 6. Set buttons to Triggers.
> 
> C. SETUP SEQU#ENCER FUNCTIONS:
> 1. I used metronome on with 2 measure count.
> 
> 2. For track 1 [T01] I set channel assign to 16B/internal.
> 
> I then started recording. After the count I started playing the 
> triggers.  When I was done with my 8 measure test, the pattern had 
the 
> notes corresponding to the bts.preset on T01 assigned to C16B.
> 
> (Hope this works; hope I jotted down all the steps right. 
Remember, 
> other settings will probably work, too.)
>Thanks a lot