Emu XL-7 & MP-7 User's Group

Hi Steve,
see my comments between your lines ....


> Von: "steve_the_composer" <smw-mail@...>
> An: xl7@yahoogroups.com
> Betreff: [xl7] Re: (not) a nasty bug + CC33-63 issue
> Datum: Sun, 25 Dec 2005 10:13:21 -0000
> 
> Re: use of OS2.0 midi merge causing midi loop lock-up.
> 
> I agree will what seems to be the problem here with one possible 
> exception.  To the best of my knowledge (please let me know if I am 
> wrong), midi merge [MERGE MIDI IN TO OUT] does NOT pass incoming midi 
> clock [start, stop, continue, and timing data] through either of the 
> midi outs.

That's not the case unfortunately. Or I dont know what happens here...

 
> If I am right (and I don't currently have a setup to test it), if the 
> loop lock-up were caused by sending the start command back into the E-
> Mu, simply telling it to ignore EXTERNAL SONG START/STOP would solve 
> the problem. (My guess is that's not the cause.)

I disabled it and no change ...

> 
> It seems more likely that continuous midi timing data is being fed 
> back. If so, shouldn't turning TRANSMIT MIDI CLOCK, solve that 
> problem?

I have to transmit MIDI clock to my other instruments. The synths
need it for arp, lfo and other timing sensitive elements ...
 
> >From the setup described, I didn't see where external gear needed 
> midi clock info from the XL.  (Did I miss it?)

See above.
I will do some further test here.
What makes me curious is that when I chose to merge MIDI in to out
on output port B it happened as well, however my B port isn't connected
to anything. Hm....

> 
> --Steve 
> 
> PS:
> 
> > Since CC33-63 is nonexistent on the XL7 this was the only solution.
> 
> They are not non-existent. You can assign CC numbers from 1 to 119 
> inclusive. 

Really ? Maybe I'm blind but when I tried to chose the CC number
for the knob after 32 it jumped to 64 and in-between values were
omitted. Could you tell me where can I do it ? 

Regards:
      Zsolt

-- 
Lust, ein paar Euro nebenbei zu verdienen? Ohne Kosten, ohne Risiko!
Satte Provisionen f\ufffdr GMX Partner: http://www.gmx.net/de/go/partner