Emu XL-7 & MP-7 User's Group

Cheers Aaron thats alot easier. Just kepted forgetting to set the
track back to internal.. And hitting enter each time..

Ive seen the 'not installed' message myself now
Its when it trys to call up a preset / rom thats not there (suprise
eh?!)
So theres the problem then. Not quite sure why when it was re-saved
with the correct presets it didnt work, but if the've been corupted
then maybe thats the problem with that.

For Erick-
so for EVENT edit window (with track assigned to EXT..)

C1 Prog:1 m:0 I:2

<< means >>

Ch# 1 preset 001 m:user preset area (MSB) I:bank 2 (LSB)

m: = ROM so val:-

0 = user prest area
14 = XL7
19 = Protean Drum
65 = Techno
67 = Beat Garden

This is as my machine you might have differant roms installed.
Check that these values are present (or the ones that you have) or
you will get the 'not installed' message.

So (mode/view) PRESET --- AUITION will give you the ROM No. (m: MSB)
and Bank No. (I: LSB)

Hope that helps, ive needed to go through it myself..
Gonz






--- In xl7@yahoogroups.com, Aaron Eppolito <synthesis77@y...> wrote:
>
> If you want to see the events in the event viewer, temporarily set
the
> track to external. When set to internal, it hides the events that
it
> puts in at tick 0 so that the casual user doesn't delete events that
> the sequencer puts in there.
>
> If you want to fix the program changes, however, you don't have to
use
> the event editor at all. Just set up the presets with the main
screen
> and resave the pattern.
>
> -Aaron
>
> --- eriksatie01 <waveplayer@t...> wrote:
>
> > --- In xl7@yahoogroups.com, "gonzinigonz" <gonzini@f...> wrote:
> >
> > > These messages are present in all command station generated
> > patterns
> > > before the first bar starts (if i recall correctly..)
> > > (In this order in the cubase list editor)
> > >
> > >
> > > Main Volume (controller No. 7)
> > > Pan (controller No. 10)
> > > Control 79 (controller No. 79) is hard coded to MIX Ouput
parameter
> > > Genpurp5 (controller No. 80) is hard coded to ARP status
parameter
> > > BankselMSB (Bank select MSB, controller No. 0)
> > > BankselLSB (Bank select LSB, controller No. 32)
> > > Progchange (its own channel message, not part of the 127
controller
> > > messages..)
> >
> > THIS is interesting!
> > now I know what I have to check. thx very much, exactly what I
> > needed!