ok guys, NOW I have a "real" midi interface. It is my old creative Live! gold, it has two real midi port and a digital in/out. I haven't bought anything because I'm planning to buy a new firewire interface with audio and midi all in one. I tried it with e-loader and it works properly. I also tried to upload the un-famous banks from Rob Papen and all went perfectly! at first strike! how many time spent on that, and the solution was simple... So I've learnt three important thing: 1. the midi out of my evolution keybord sucks 2. never send sysex with a sucking midi out 3. never send sysex before doing a back-up Now I've solved the problem the upload those rob papen banks, but as you know I have a new one: my sequences are corrupted and my xl-7 doesn't work properly. So I will back up everything and then reset the machine. How can I reset it? I haven't found this anywhere in the manual. thx --- In xl7@yahoogroups.com, Aaron Eppolito <synthesis77@y...> wrote: > > If you think your global options are set to strange values, reset them > by simply restoring the factory multisetup (#63). Remember that if you > don't have sequence data on a track (i.e. a note or controller or > something) it won't save the preset for that channel. That's by design > (though a choice I regret considering how many people it's confused). > > -Aaron > > PS. compacting memory will never fix anything. It's only to defragment > memory before going out live so that compaction doesn't run > automatically while you're in the middle of your set. If it says it > doesn't need it, it really doesn't. > > --- gonzinigonz <gonzini@f...> wrote: > > > ooops yes your right Chris, bit less hectic than starting again.. > > > > >Sure I have to buy a midi interface to back up things! > > cool, you wont regret it > > > > >since now I haven't do back up, and I will never try again to send > > >sysex without doing back up before! > > always.. > > > > >now the question is: do you think that a reset would give me back my > > >xl-7 as before, or memory has became phisically corrupted? > > Well you will lose your sound banks as i dont think theres a level of > > reset that will leave them intact. > > The other level of reset will leave the user pattern data untouched, > > but if this is were the problem is then you wont have much choice. > > As long as the unit dosent have other hardware problems a reset > > should get things back to a clean slate. > > You will have to reload sound bank data though.. think the presets > > get copied over to the user banks when you reset. > > Also if you do the whole memory reset the pattern data will have to > > be loaded back as well. Seeing that your having problems with this.. > > Id get a midi interface before doing anything and atempt to back up > > whats there. If the problem reappears after a successful reload then > > theres yopur problem. you might be able to track it down to 1 rogue > > patten or sound patch (more likely to be a pattern in that case..) > > Ive come accross this of problem before with other gear (akai..) > > Hopefully its a problem like Chris has mentioned > > be carefull eh > > Gonz > > > > > > > > > > > > --- In xl7@yahoogroups.com, "Chris" <cdh79@g...> wrote: > > > check if you have disabled the midi-channel.. > > > > > > the patter loads up with a program change command, so if you have > > midi > > > disabled for this track (i.e. when using an external synth in > > another > > > song and not changing it back) it might happen that the right > > pattern is > > > not loaded.. > > > > > > try enabling all midi channels, then press the stop button 3 times > > to > > > reset the pattern (or simply change the pattern and go back to it > > again) > > > > > > -----Original Message----- > > > From: xl7@yahoogroups.com [mailto:xl7@yahoogroups.com] On Behalf Of > > > eriksatie01 > > > Sent: Samstag, 1. Oktober 2005 22:02 > > > To: xl7@yahoogroups.com > > > Subject: [xl7] Re: (not installed) ???? please help!!!! > > > > > > > > > Sure I have to buy a midi interface to back up things! > > > since now I haven't do back up, and I will never try again to send > > > sysex without doing back up before! > > > now the question is: do you think that a reset would give me back > > my > > > xl-7 as before, or memory has became phisically corrupted? > > > > > > thx > > > > > > --- In xl7@yahoogroups.com, "gonzinigonz" <gonzini@f...> wrote: > > > > Its possible that the internal memory has been corupted whilst > > trying > > > > to send sysex to it, seeing that you've had so hassle trying to > > get > > > > it to work. (command station timming out and stuff) > > > > Have you backed up your patterns via E-Loader? > > > > As you dont seem to have a midi in on your PC i guess you havant > > been > > > > able to back up your sound banks? > > > > It would of been good if you could of done this before things > > went > > > > bad, as now it looks like you might have to reset the machine. > > > > I think thats what you might have to do if its playing around > > with > > > > you. > > > > Also you need to get a proper midi interface for your PC as you > > have > > > > to back up data. Its a computer and not the most reliable one at > > > > that.. > > > > Maybe someone else here has a better idea? > > > > Gonz > > > > > > > > > > > > > > > > > > > > --- In xl7@yahoogroups.com, "eriksatie01" <waveplayer@t...> > > wrote: > > > > > alredy tried... > > > > > it tells me that there's no need to do it and it doesn't do > > > > nothing... > > > > > > > > > > please doctor, tell me... is it serious? > > > > > > > > > > > > > > > --- In xl7@yahoogroups.com, "malik" <malik_martin@h...> wrote: > > > > > > holy shit. whats whole defragmenting thing the command > > station > > > > can do? > > > > > > maybe that will help. maybe you should wait for a better > > opinion. > > > > > > > > > > > > > > > > > > --- In xl7@yahoogroups.com, "eriksatie01" <waveplayer@t...> > > wrote: > > > > > > > what's happening here? > > > > > > > today I turned on my xl-7 and many of may patterns was > > > > corrupted. may > > > > > > > traks are not correctly assigned to its preset. Insted of > > the > > > > name af > > > > > > > the right preset,a message says (not installed). > > > > > > > Moreover, if I re-assign the right preset to the track, and > > > > > > then save > > > > > > > it again, this assignement go lost when I recall the > > pattern!! > > > > > > > I've tried to save the preset to another location, to save > > the > > > > patter > > > > > > > to another location, to move the track to another track > > number > > > > without > > > > > > > success. > > > > > > > plese help me, I fear that all those tries with sysex > > uploading > > > > has > > > > > > > caused some damage to my machine and to my work! > > > > > > > > > > > > > > davide > > > > > __________________________________ > Yahoo! Mail - PC Magazine Editors' Choice 2005 > http://mail.yahoo.com >
Message
Re: (not installed) ???? please help!!!!
2005-10-12 by eriksatie01