ooops yes your right Chris, bit less hectic than starting again.. >Sure I have to buy a midi interface to back up things! cool, you wont regret it >since now I haven't do back up, and I will never try again to send >sysex without doing back up before! always.. >now the question is: do you think that a reset would give me back my >xl-7 as before, or memory has became phisically corrupted? Well you will lose your sound banks as i dont think theres a level of reset that will leave them intact. The other level of reset will leave the user pattern data untouched, but if this is were the problem is then you wont have much choice. As long as the unit dosent have other hardware problems a reset should get things back to a clean slate. You will have to reload sound bank data though.. think the presets get copied over to the user banks when you reset. Also if you do the whole memory reset the pattern data will have to be loaded back as well. Seeing that your having problems with this.. Id get a midi interface before doing anything and atempt to back up whats there. If the problem reappears after a successful reload then theres yopur problem. you might be able to track it down to 1 rogue patten or sound patch (more likely to be a pattern in that case..) Ive come accross this of problem before with other gear (akai..) Hopefully its a problem like Chris has mentioned be carefull eh Gonz --- In xl7@yahoogroups.com, "Chris" <cdh79@g...> wrote: > check if you have disabled the midi-channel.. > > the patter loads up with a program change command, so if you have midi > disabled for this track (i.e. when using an external synth in another > song and not changing it back) it might happen that the right pattern is > not loaded.. > > try enabling all midi channels, then press the stop button 3 times to > reset the pattern (or simply change the pattern and go back to it again) > > -----Original Message----- > From: xl7@yahoogroups.com [mailto:xl7@yahoogroups.com] On Behalf Of > eriksatie01 > Sent: Samstag, 1. Oktober 2005 22:02 > To: xl7@yahoogroups.com > Subject: [xl7] Re: (not installed) ???? please help!!!! > > > Sure I have to buy a midi interface to back up things! > since now I haven't do back up, and I will never try again to send > sysex without doing back up before! > now the question is: do you think that a reset would give me back my > xl-7 as before, or memory has became phisically corrupted? > > thx > > --- In xl7@yahoogroups.com, "gonzinigonz" <gonzini@f...> wrote: > > Its possible that the internal memory has been corupted whilst trying > > to send sysex to it, seeing that you've had so hassle trying to get > > it to work. (command station timming out and stuff) > > Have you backed up your patterns via E-Loader? > > As you dont seem to have a midi in on your PC i guess you havant been > > able to back up your sound banks? > > It would of been good if you could of done this before things went > > bad, as now it looks like you might have to reset the machine. > > I think thats what you might have to do if its playing around with > > you. > > Also you need to get a proper midi interface for your PC as you have > > to back up data. Its a computer and not the most reliable one at > > that.. > > Maybe someone else here has a better idea? > > Gonz > > > > > > > > > > --- In xl7@yahoogroups.com, "eriksatie01" <waveplayer@t...> wrote: > > > alredy tried... > > > it tells me that there's no need to do it and it doesn't do > > nothing... > > > > > > please doctor, tell me... is it serious? > > > > > > > > > --- In xl7@yahoogroups.com, "malik" <malik_martin@h...> wrote: > > > > holy shit. whats whole defragmenting thing the command station > > can do? > > > > maybe that will help. maybe you should wait for a better opinion. > > > > > > > > > > > > --- In xl7@yahoogroups.com, "eriksatie01" <waveplayer@t...> wrote: > > > > > what's happening here? > > > > > today I turned on my xl-7 and many of may patterns was > > corrupted. may > > > > > traks are not correctly assigned to its preset. Insted of the > > name af > > > > > the right preset,a message says (not installed). > > > > > Moreover, if I re-assign the right preset to the track, and > > then save > > > > > it again, this assignement go lost when I recall the pattern!! > > > > > I've tried to save the preset to another location, to save the > > patter > > > > > to another location, to move the track to another track number > > without > > > > > success. > > > > > plese help me, I fear that all those tries with sysex uploading > > has > > > > > caused some damage to my machine and to my work! > > > > > > > > > > davide > > > > > > _____ > > YAHOO! GROUPS LINKS > > > > * Visit your group "xl7 <http://groups.yahoo.com/group/xl7> " on > the web. > > > * To unsubscribe from this group, send an email to: > xl7-unsubscribe@yahoogroups.com > <mailto:xl7-unsubscribe@yahoogroups.com?subject=Unsubscribe> > > > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of > Service <http://docs.yahoo.com/info/terms/> . > > > _____ > > > > > [Non-text portions of this message have been removed]
Message
Re: (not installed) ???? please help!!!!
2005-10-01 by gonzinigonz