Yahoo Groups archive

Emu XL-7 & MP-7 User's Group

Index last updated: 2026-04-14 00:15 UTC

Message

Re: mp-7 with usb device

2005-08-12 by soscary00

I wish it did, my brother.  Ooh I wish it did.  b/c I'd be JAMMIN!

--- In xl7@yahoogroups.com, "Bob S." <tttsystems@e...> wrote:
> That should work !
> 
> 
> ----- Original Message -----
> From: "soscary00" <soscary00@y...>
> To: <xl7@yahoogroups.com>
> Sent: Thursday, August 11, 2005 5:28 PM
> Subject: [xl7] Re: mp-7 with usb device
> 
> 
> > I use the UA-1X and I'm connecting the xx-7 to the ua-1x with a
> > 2RCA - 2 1/4 in. cable.
> >
> >
> > --- In xl7@yahoogroups.com, "Bob S." <tttsystems@e...> wrote:
> > > Also, make sure you are using a TS (2 conductor) plug in the
> > output of the
> > > XX-7 it does not have balanced outs and the UA-25 (if you are
> > using that
> > > one) does.
> > >
> > > Bob
> > > Corona/Riverside, CA
> > >
> > >
> > > ----- Original Message -----
> > > From: "soscary00" <soscary00@y...>
> > > To: <xl7@yahoogroups.com>
> > > Sent: Wednesday, August 10, 2005 11:44 PM
> > > Subject: [xl7] Re: mp-7 with usb device
> > >
> > >
> > > > The Yamaha DJX works with the Edirol.  I connected the DJX 
to my
> > > > laptop using the Edirol, so I expected it to be the same with
> > the MP-
> > > > 7.  I know the MP-7 output works, b/c I connect headphones to
> > the MP-
> > > > 7 and I hear it.
> > > >
> > > > --- In xl7@yahoogroups.com, "Bob S." <tttsystems@e...> wrote:
> > > > > Levels out of the XX-7 are line levels and will so more 
than
> > > > static on a
> > > > > working input.  Have you used your Edirol inputs 
before...are
> > they
> > > > > configured ok?  And have you checked the output of the XX-7
> > and is
> > > > the XX-7
> > > > > volume pot turned up?
> > > > >
> > > > > Bob
> > > > > Corona/Riverside, CA
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "soscary00" <soscary00@y...>
> > > > > To: <xl7@yahoogroups.com>
> > > > > Sent: Wednesday, August 10, 2005 11:22 PM
> > > > > Subject: [xl7] mp-7 with usb device
> > > > >
> > > > >
> > > > > > I tried to connect my E-MU MP-7 drum machine to my laptop
> > using a
> > > > > > Edirol USB - Audio interface, but all my laptop picked up
> > was a
> > > > low
> > > > > > static.  I'm thinking that I need to send the MP-7 signal
> > > > through a
> > > > > > stereo amplifier before it goes into the USB interface.  
I
> > wish I
> > > > > > didn;t have to use a stereo amp b/c I don't got the $ to 
buy
> > > > one.  Do
> > > > > > you connect the drum machine to your laptops without 
using
> > > > MIDI?  I
> > > > > > wish I could send the MP-7 signal to my laptop  through 
the
> > HOST
> > > > > > connector that's on the back of the drum machine.
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Yahoo! Groups Links
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.