Emu XL-7 & MP-7 User's Group

Thanks, that helps a lot I think.  My issue was I think I was trying to make a "Mark" preset 
and it's not going to happen.  I'm going to have to make a few of them that address 
different tasks and use both outputs of my MIDI controller for full flexibility.  Man, my 
setup is becoming so complex it's hurting my head!  I can't wait until it's put together.

Mark

--- In xl7@yahoogroups.com, "steve_the_composer" <smw-mail@p...> wrote:
> (1) What are you trying to do? (Or are you exploring possible
> options?)
> 
> (2) Does your MOTU have software and are you using it to set up user 
> routing configurations?
> 
> I have the MT Express (8x8 midi router, parallel port version--
> not usb). For Win98SE there is Console software; for WinXP there is 
> Cockworks. They also have Mac software.
> 
> There are so many variations.  For example, I have one user preset 
> on the MTXP and one corresponding E-Mu Multisetup where Sonar (on the
> PC) is the master. I have a different MTXP/E-Mu setup for pattern
> creation on the E-Mu using a single keyboard.
> 
> Also, I have an almost empty pattern template to record on the E-Mu 
> sequencer tacks for external devices. (Each track in the template 
> pattern has volume data to preserve the external track setting.)
> 
> For older gear (Roland Intelligent Arranger), I used to have MOTU 
> presets (1) for Cakewalk as master clock and (2) for the intelligent 
> arrager as master clock.
> 
> If your MOTU uses software for setting up user presets like the 
> MTXP, the possibilities are almost limitless--depending on what you 
> are trying to do.
> 
> Hope this helps.
> 
> --Steve
> 
> --- In xl7@yahoogroups.com, "zerocrossing2001" <ze
> rocrossing2001@y...> 
> wrote:
> > Right.  I'm trying to do something a bit different.  I think its
> > going to be a matter of me using my keyboard's second midi out and 
> some creative 
> > routing.  I was hoping for another way, as I have a few multi-
> timbral devices that could 
> > work this way.
> > 
> > Mark