Emu XL-7 & MP-7 User's Group

Its rather simple. You don't need a midi manual. You send two 
numbers to determine the bank [Bank Select MSB and Bank Select LSB] 
followed by a program change. Bank Select controls are CCs.  (Look 
in the Appendix to your manual.Bank Select MSB is CC#0; Bank Select 
LSB is CC#32.

BUT: 

The folks at E-Mu made it easy for you. You can set it up on ONE 
PAGE in the E-Mu event editor.

1. Go to the event editor, insert a prog event.
2. That's it!!!

m = msb = most significant byte = E-Mu ROM ID
l = lsb = least significant byte = E-Mu ROM Bank
prog = program change = E-Mu Patch Number.

msb/ROM ID can be gotten by pressing audition.

To switch multisetups, use msb = 80, lsb = 0. (Its in the manual 
under Restoring multisetups.)

Hope this helps. 


--- In xl7@yahoogroups.com, "malik" <malik_martin@h...> wrote:
> cool just got one of my midi books back from my brother so i can 
> learn how to use bank messages(after all these years i finaly have 
a 
> reason to) but i wont be able to try till i get back home. didnt 
pay 
> the internet bill this month.....
> 
> thanks
> 
> 
> 
> --- In xl7@yahoogroups.com, "steve_the_composer" <smw-mail@p...> 
> wrote:
> > Double check the manual, but I think programmable controller 
> settings 
> > are saved with Mulisetups. Multis can be called with bank 
> > switch/program change commands.  That sounds like what you are 
> asking 
> > to do.
> > 
> > Hope this helps.
> > 
> > --- In xl7@yahoogroups.com, "malik" <malik_martin@h...> wrote:
> > > hi there.
> > > when you set the programmable knobs in the controler menu for 
> > external 
> > > controlling i know that you can only set controll for 16 knobs 
> but 
> > is 
> > > there  a way like say, switching presets that i can have a 
> totaly 
> > new 
> > > set of controllers. or is my only way of getting around this 
> through 
> > > multisetups?