Emu XL-7 & MP-7 User's Group

BTW, have you thought about using foot switches (or a foot 
controller) to start and stop the E-Mu?  Hmmmmm,  Having said that, 
I am wondering if you can program the ReMOTE's Transport buttons to 
serve the same function as foot controllers.

ReMOTE pdf (page 43):
The transport buttons may defined in the same manner as any of the 
other programmable buttons in Template Edit Mode. However, they are 
ideally suited to controlling sequencers or recording device. 
Therefore, they can alternatively be assigned to transmit MIDI MMC 
(MIDI Machine Control) commands. Each one of the 64 Template 
memories can hold its own set of definitions for these five buttons.
The details of assigning MMC to these buttons and the range of MMC 
commands available is described in detail on page 32.
Some sequencers (such as Cubase) Use other types of MIDI message for 
remote control purposes such as MIDI Note messages. The TRANSPORT 
buttons can of course be configured to transmit these instead
of MMC in the normal way. Consult your sequencer documentation for 
full details of the MIDI messages used for remote control purposes.