Emu XL-7 & MP-7 User's Group

--- In xl7@yahoogroups.com, "Fab Claxton" <fabclaxton@y...> wrote:
> Hey gang,
> The one thing I don't like about the XL-7 is the lack of removable 
> storage (ie: SmartMedia cards, Zip disks, etc.). 

Same here, does seem to be a bit crazy to of not included some kind 
of memory card back up for your seq's and prest data.
No experience with the flash ram.. 

> Also, does anyone else hate the jog wheel as much as I do? When I 
> turn the knob slowly, sometimes it doesn't even change the preset 
> number at all. If I speed it up even slightly, it jumps all over 
the 
> place (ie: from Preset 1 - bank 0 to Preset 115 bank 3). It's 
> ridiculous. I don't remember having this problem before I upgraded 
to 
> OS 2.0, but maybe I'm not remembering correctly. The problem seems 
to 
> be at its worst when I first turn the machine on. After about 10 
> minutes, the job wheel seems to become a bit more responsive (but 
not 
> much). Has anyone else experienced this, and if so, is there a way 
to 
> improve it (ie: using Thin Events or some other program function)? 

Might need a clean with some contact cleaner. Ive had problems with 
encoders before that start acting randomaly. Clean them up and the 
problem vastly improves (if its not physically damaged)  
Could even be a dry joint on the pcb.
My encoder works fine using v2.0.
The USB socket on my main board wasnt soldered correctly, it would 
flop around when you moved the cable. Its fine now.
Clean it first and see if it improves.
Regards
Gonz