Emu XL-7 & MP-7 User's Group

Alex Jacobi wrote:
> 
> > Von: Scott Ruda <scottr@...>
> > Antworten an: xl7@yahoogroups.com
> > Datum: Sun, 13 Jan 2002 23:30:46 -0800
> > An: xl7@yahoogroups.com
> > Betreff: Re: [xl7] 12 hous of work and another thing i cant record
> due to the
> > bugs.
> >
> >> It changes all the fx routings on my E5000 each time i press stop
> >> twice.
> >
> > When you press the Stop button twice it forces a send of all the
> 'setup'
> > info that is at tick 0 (MultiSetup settings etc.). If it is setting
> > external things not the way you want, it sounds like your MultiSetup
> is
> > not set correctly for what you want to happen. When you make changes
> to
> > your MultiSetup you will have to Save it, otherwise it will not be
> the
> > same the next time you power up. Once you play the pattern once,
> there
> > is a presumption that there is no need to send that setup info the
> next
> > time it loops or you just want to Play because things are already
> set
> > up, so it is not sent.
> 
> I\ufffdve had the same problem with my E4x, here\ufffds a workaround, delete all
> control 79 and 80 in your pattern. Control 79 (or 80, i don\ufffdt
> remember)
> switches the output assignment in  your sampler.
> 
> Does anybody know a way how to make the mp7 not save this data
> intially to
> the pattern, or a way to edit this tick 0?
> 
> >> Sticking notes are happening all the time.  Like evry time i run
> the
> >> patterns i am working on and the seem to stick and un stick at
> will.
> 
> >Can you isolate on any other info that correlates to when this
> happens?
> >Do you have a pattern that does it all the time? If so, send it to me
> >and I will investigate it.
> 
> I have the same problem, it happens only in some patterns, that some
> notes
> play sometimes and sometimes not, it\ufffds always the same note
> 
> Alex
> 
>                  

Make sure when using external gear you set up the those tracks' status
immediately to external. The second you record something into a XL-7 on
that track and the track status is set to both or internal, the Program
Change, Arp status, Volume, Pan and Mix status will be recorded onto
tick 0 of that track. If you forget, you'll need to do what Alex has
suggested and delete that information. 

sean at e-mu / ensoniq