Emu XL-7 & MP-7 User's Group

Sounds like you might be missing a rubber pad from the bottom. If it 
wobbles it should be obvious where the problem is by turning it 
over. I assume you have tried setting it on different surfaces. As 
for the turning on, you must be using the soft switch and not the 
hard switch on the back, correct? 
If the power in changes and the hard switch is still on then it will 
come on. For example if you turn on an off your surge protector or 
unplug and replug the unit. If you are not doing any of these things 
you may want to make sure that your power flow is regular (no surge 
or fault)

--- In xl7@yahoogroups.com, "metalflakk" <metalflakk@y...> wrote:
> Hi,
> Just a quick question, does anyone else's command station wobble 
from side to side when 
> you press the pads? Will E-mu fix this under warranty?
> 
> Also, mine spontaneously turns itself on every so often....but I 
guess that's to be expected.
> =J=