Emu XL-7 & MP-7 User's Group

Thanks Ravi, I'll try it this weekend.

-----Original Message-----
From: Ravi Ivan Sharma [mailto:noision1@...] 
Sent: Saturday, March 20, 2004 10:34 AM
To: xl7@yahoogroups.com
Subject: Re: [xl7] Add sweep to preset

Check out the Manual pages 170 through 174.

The way to ad sweep effects, usually means having a moving filter. If
you can recreate the sweep by manually raising the FilterQ (second knob
from the top left) and then sweeping the filter (top left knob), then
all you need to do is automate that movement. That is what the Filter
Envelope is for. The panel has the Filter Attack and Decay knobs (the
Sustain and Release is in the patch and you have to use the screen to
tweak those) with which you use to set the speed of an upward sweep
(attack) or downward sweep (decay), but they won't do anything unless
you go into the patch and adust the Filter Envelope amount to something
higher. This makes the Filter Attack and Filter Decay take control of
the Filter Cutoff (as if it were tweaking the knob instead of you). The
way it works is that if you put Filter Envelope Amount to full and put
the Filter Cutoff to Zero, then the Envelope sweeps the filter from zero
to full based on the settings of the Attack Decay Sustain and Release of
the Envelope. You may not want to start the filter at zero (no sound) so
set the cutoff to the place you want the sound to sound like at the
beggining (or end) of the sweep. Then adjust the Envelope amount to
taste as well, setting full makes the filter go to full and it may stay
there for a while if the attack is still taking its time trying to push
it up further than it can go (this happens if env amount is full but
filter cutoff is more than zero). If you want a sweep that only goes so
far, then bring the value of Envelope Amount down. Once you have the
timing and scope of the envelope the way you want it, then tweak the
filter cutoff and filter q knobs to get the sound of the sweep you want.
Use the Filter Decay and Attack to tweak the timing more as well. Then
save your new sound into a user preset.
  ----- Original Message ----- 
  From: jdou1901 
  To: xl7@yahoogroups.com 
  Sent: Saturday, March 20, 2004 8:58 AM
  Subject: [xl7] Add sweep to preset


  I'm a beginner at best when it comes to editing presets.
  Is there an easy way to add a sweep effect to a preset or an 
  instrument? The one I was interested is in xl-7 bank 3 #57 
  bpm:bubbler.


        Yahoo! Groups Sponsor 
              ADVERTISEMENT
             
       
       


------------------------------------------------------------------------
------
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/xl7/
      
    b.. To unsubscribe from this group, send an email to:
    xl7-unsubscribe@yahoogroups.com
      
    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service. 



[Non-text portions of this message have been removed]




 
Yahoo! Groups Links