Emu XL-7 & MP-7 User's Group

Check your OS on the Kurz.  I remember having a similar problem with ours.
Once I updated the OS, the problem ceased.

Find it at this website if you don't have it already.
www.kurzweilmusicsystems.com  Look under PC2 Downloads

Rev P
  -----Original Message-----
  From: S V G [mailto:vsyevolod@...]
  Sent: Monday, February 23, 2004 12:44 PM
  To: xl7@yahoogroups.com
  Subject: [xl7] MIDI backwash



       Greetings,

       My MIDI layout is:  Kurzweil PC2X keboard MIDI out --> XL-7 MIDI in.
No return MIDI cable is
  in place.

       The other day I was playing some patterns on my XL-7.  Returning to
my default mode which is
  how I control the sounds from my Kurzweil keyboard, I found that the
Kurzweil was buggered.  It
  couldn't change programs, or only in a limited way.  Powering down and
then back again fixed it.
  The question is: how could this have happened?  Is there the possibility
of a small voltage or
  something travelling backwards on a MIDI cable and fugging with the master
controller?  This is
  the only way the two instruments are connected, other than through a
common ground at the mixer.

       Not a problem at all, just a little confused.

          Stephen






  __________________________________
  Do you Yahoo!?
  Yahoo! Mail SpamGuard - Read only the mail you want.
  http://antispam.yahoo.com/tools

        Yahoo! Groups Sponsor
              ADVERTISEMENT





----------------------------------------------------------------------------
--
  Yahoo! Groups Links

    a.. To visit your group on the web, go to:
    http://groups.yahoo.com/group/xl7/

    b.. To unsubscribe from this group, send an email to:
    xl7-unsubscribe@yahoogroups.com

    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]