Emu XL-7 & MP-7 User's Group

Ok.
This is a global setting:
Press the global button and scroll down to *mix output* and you can 
then define an output for each channel (as default the track numbers 
are the same as the channels)- dont forget to scroll back and *save 
multisetup*  after renaming it. It can then be used as a default to 
build upon for later multisetups. You´ll have to save the hard-pan 
(left or right) in the preset itself (again save to a user location 
after setting).
I´d suggest you do some searching for mutisetups here in the group 
before going too far.Theres also some great tips and tricks and FAQs 
in the files (again, here in the group)
good luck
:paul


--- In xl7@yahoogroups.com, "bezowinz" <bezowinz@y...> wrote:
> Thanks for getting bacl to me!
> 
> My manual may be a bit different.  My page 212 has Volume Envelope 
info, 
> but I did see Mix Output instructions on other pages.
> 
> Thiing is, the instructions they give there are for sending effects. 
 I guess it's 
> the same concept.  Being new to the instrument makes it tough not 
getting 
> specific instructions, but you are the 2nd person that told me it 
can be done, 
> so I'm relieved.  I just have to re-interpret the instructions.
> 
> And yes, I want to use the 6 outs as mono.  From using other 
equipment, I 
> figured I could hard pan 2 tracks to the same set of stereo outs to 
use them as 
> mono.
> 
> Thanks!
> --- In xl7@yahoogroups.com, "phest2k" <tuttle@l...> wrote:
> > "bezowinz" <bezowinz@y...> wrote:
> > "I'm looking to do is assign one tracks to each out so that I'm 
> > > able to record 6 tracks of audio into Pro Tools at once.  Is 
this 
> > possible?"
> > 
> > Hi - Welcome to the group
> > This is totally posible.
> > The term for this is *Mix Output* and can be found on page 212 of 
the 
> > manual.
> > The outputs are stereo so you can have a track asigned to one of 
the 
> > three stereo outputs.If you want to utilise the 6 outputs as 
single 
> > mono outputs (say, to do post panning in pro tools) then you can 
> > *hard-pan* any track so it goes out of a specified mono output.
> > Hope this helps
> > :p
> > 
> > 
> > --- In xl7@yahoogroups.com, "bezowinz" <bezowinz@y...> wrote:
> > > I joined the group a week or 2 ago, but just got the PX-7 
yesterday. 
> >  So far, it's 
> > > a great machine, but there's something that I can't find in the 
> > manual that may 
> > > or may not be there.  I'd appreciate your help.
> > > 
> > > The main reason I upgraded my drum machine was for the extra 
analog 
> > outs.  
> > > I was working with the Boss DR770 wich only has one stero pair 
and 
> > another 
> > > individual out.
> > > 
> > > Any way, what I'm looking to do is assign one tracks to each out 
so 
> > that I'm 
> > > able to record 6 tracks of audio into Pro Tools at once.  Is 
this 
> > possible?  Can 
> > > you point me to pages or chapters in the manual?  I'm only able 
to 
> > find info on 
> > > assigning effects.
> > > 
> > > If this can't be done, what's the work around?  Should I record 
each 
> > track into 
> > > Pro Tools as midi data?  Ultimately, my goal is to to record as 
many 
> > tracks as 
> > > possible in one pass and keep each drum sound on its own track.
> > > 
> > > 
> > > Thanks!