Emu XL-7 & MP-7 User's Group

Ok here's what you SHOULD do.
I own both an MP-7 and RS7000.
Set the Mp as master / RS as slave .
Set the MP/XL to recieve start stop commands.
Make sure the correct send midi clock protocol is on in the RS ans set midi echo thru to off.
Now set up the blank pattern in the MP7 track 1 .
Make sure it is the same meter and pattern length of the corresponding RS7000 Style section.
Put the RS into overdub record mode and set loop to off.
Hit play on the Command station.
The RS7000 will play till section end (one run through only).
It will stop sending an auto stop command from the RS7000.
Then paste to clipboard and explode tracks assign voices and save etc etc etc ....
Works for me anyway. ;)

_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!


[Non-text portions of this message have been removed]