Yahoo Groups archive

Wiardgroup

Index last updated: 2026-04-28 23:41 UTC

Message

Re: joystick

2002-06-24 by waveform100

> Analogue Systems Comb filter also is a bit wack, but they are 
> saved in my book by making EXCELLENT oscillators and filters.

I prefer the AS-VCO and Filters over the Doepfer-Modules, but the 
Wiard and Technosaurus VCO's are in terms of Sound (roundness, 
fullness) (IMHO of course) much better. In terms of flexibility my 
Wiard-VCO's beats all the others including the Selector. One thing is 
interesting: My little A110 Doepfer-VCO's makes some very nice, fat 
and dirty sounds when you modulate them a tiny little bit with noise 
(in my case: doepfer pink/red noise). Too bad that I never tried that 
with the AS-VCO's, but I sold them. But I still work with a AS 
Multimode-Filter and the AS-Bode in my Doepfer Frame. I like the AS 
Multimode as it is very flexible, but in almost every case I prefer 
to use one of the Wiard Filters. But I guess some might like that 
kind of dirtyness of the AS-Filters resonance. 

Olivier 
  


> 
> But getting back to the lack of a trigger in their joysticks, I 
don't 
> think there is any place on the Deopfer or AS boxes (outside of 
> their keyboards) where you can generate a manual trigger. 
> 
> IMHO,
> 
> P
> 
> --- In wiardgroup@y..., davevosh@a... wrote:
> > In a message dated 5/25/2002 8:38:23 AM Eastern Daylight 
> Time, 
> > cw.chris@z... writes:
> > 
> > 
> > > I think calling the lack of trigger button a 'major' 
shortcoming 
> is a bit
> > > strong.
> > > 
> > 
> > 
> > 
> > chris,
> > okay, point taken - perhaps i should have qualified the 
> statement by adding 
> > "IMHO". i really do think that the versatility of the module from 
> both 
> > doepfer and an. sys. was compromised by the lack of a bucks 
> worth of parts 
> > though. again, this is IMHO.
> > or, maybe i was too influenced by the vcs3 as a youngster ?  :^)
> > best,
> > dave

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.