Wiardgroup

You are a man of great taste.




on 6/12/02 2:10 PM, gcmci at gcmci@yahoo.com wrote:

For the record, it looks like my case will be anodized grey.

The case is .090 aluminum (the same gauge as the faceplates of the
Wiard modules).  The endbells will be cut from the same material and
welded in place, providing consistent strength and rigidity throughout
the unit.

Mounting of modules is achieved via Vector TS600 T-slot extrusions and
square 4-40 nuts that slide in the channel.  These extrusions will be
welded into the place, recessing the modules slightly into the case.


Two Blacet PSCON boards mount on the surface behind the jackfields, and
connect to an external power supply via 4 pin xlr connector panel
mounted on the hidden panel (inside the triangular tunnel on the bottom
of cabinet).  

Total weight, including modules is expected to be under 20 lbs.

gary




--- In wiardgroup@y..., "petergrenader" <pgrenader@m...> wrote:
> 
> <<Of course the aluminum case could be anodized blue or black
> (silver, plum?)>>
> 
> Me an art director by trade.  Contrast is a good thing.
> 
> Silver
> 
> Dull silver with blue faceplates = terrific
> 
> Plum with blue faceplates = (insert sound of gameshow beeper
> when you guess an answer incorrectly here)
> 
> Blue with black:   = (insert sound of gameshow beeper when you
> guess an answer incorrectly here)
> 
> Blue with blue faceplates:  too much of a good thing
> 
> My $.02.
> 
> love you guys,
> 
> Peter Grenader



To unsubscribe from this group, send an email to:
wiardgroup-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .