Wiardgroup

All the different fuctions are graphed and labeled in 3 D on the 
Wiard hompage.

Equal power panning involves putting a VCA before the panning 
VCAs and adjusting the signal level to make up the lost "power" 
in the middle of the crossfade. The common VCA has to have 
offset and input gain controls.

In the case of EDGE it peaks in the middle of each side of a 4 
channel pan. If needed "dome" can adjust the power with all 4 
chanels active (using another VCA or a common feed to all 4 
VCAs).


--- In wiardgroup@yahoogroups.com, "paradigmshiftbeats" 
<c.d.sawyer@t...> wrote:
> 
> Can someone provide a detailed explanation of the EDGE 
function of 
> the JAG? I thought I remember reading that, among other 
uses, it 
> allows for equal-power panning, but I could not locate this in 
the 
> archives or in the JAG manual. Specifically, what is the 
voltage's 
> state at various x/y positions assuming typical joystick 
operation?
> 
> Thanks,
> 
> Chris