Wiardgroup

Yes, I would use one of those supplies. You then would have just a 5-pin DIN
connector (just like a MIDI jack) on the back of your desktop device (the Elpac
supply comes with a 5-pin DIN plug).

I've been thinking about a similar little device. I currently have a mega-control
center mounted in a DJ case that has two joysticks, two JAGs, two Noise-Rings,
a PSIM, two Blacet multiples, and two Blacet linear VCAs but it is a bit large (I'll
post a picture).

I think what you are considering (two joysticks, a JAG, and some attinuator/multiples)
is about the correct collection. Perhaps you can do it with two joysticks, a JAG, two
Blacet multiples, and two Blacet VCAs.


--- In wiardgroup@yahoogroups.com, "mritenburg" <mritenburg@y...> wrote:
> 
> > size to a minimum; no on-board power supply.
> 
> You should check-out the Elpac WM071-1950-D5 power supply used with 
> the Wiard 300 system.  WM071-1950-D5 is the current part number for 
> Elpac's +/-15v supply.
> 
> http://www.elpac.com/products/powersupplies/external/index.cfm?
> Type=External&Output=2#Results
> 
> Matthew