Wiardgroup

That'll play!  Upload a pic when it's done...

Mike

BTW, note that the way mine works is that each group of four has one 
input and 3 outputs BUT if you don't plug anything into the input of 
one group then the outputs are fed by the next group's in.  So you 
could get:

3 x  1 in 3 out
or
1 x  1 in 6 out + 1 x 1 in 3 out
or
1 x  1 in 9 out

I ripped off Paul Schreiber's clever normalizing wiring scheme.

m

--- In wiardgroup@yahoogroups.com, "Gary Chang" <gchang@c...> wrote:
> I will be formatting my mult as 2 x 6, to feed the multichannel
> panning VCA array.... (One in - 5 outs).
> 
> gary
> 
> 
> --- In wiardgroup@yahoogroups.com, "Mike Marsh" 
<michaelmarsh@s...> wrote:
> > OK, it's in the Files section.  The mult is 3 x 4, though but I 
bet 
> > you could modify the fpd without too much trouble.  I also 
posted 
> > the mixer panel; another wonderful addition to the Blacet 
modular.  
> > Ken Stone makes some pretty amazing stuff!
> > 
> > Mike
> > 
> > 
> > --- In wiardgroup@yahoogroups.com, "Gary Chang" <gchang@c...> 
wrote:
> > > Mike,
> > > 
> > > Please do post the Schaeffer file - a 2 x 5 mults on a 1.5 
inch 
> > panel
> > > will perfectly fit as the last module in my system, and will 
feed 
> > the
> > > Blacet VCAs (the panning patch) from the pair of Lowpass Gates.
> > > 
> > > Gary
> > > 
> > > 
> > > --- In wiardgroup@yahoogroups.com, "Mike Marsh" 
> > <michaelmarsh@s...> wrote:
> > > > Hi All -
> > > > 
> > > > Gary's posts about the JAG + Blacet Dual VCA had some 
references 
> > to 
> > > > mults.  I know the Wiard 300 modules have lots of patching 
> > options, 
> > > > but the Blacet modules do not have as many.  In fact it is 
so 
> > > > restricted that I built this mult - easy build, and cheap, 
too.  
> > > > Inspired by my MOTM Mult.  A really handy addition to my 
growing 
> > > > Blacet/Wiard modular.
> > > > 
> > > > If anybody wants the Schaeffer file for the panel I can post 
> > that.
> > > > 
> > > > I also built a 5 input mixer based on Ken Stones DC MIxer 
board 
> > in a 
> > > > Blacet 2U.  Again, most handy!
> > > > 
> > > > Mike