Wiardgroup

I will be formatting my mult as 2 x 6, to feed the multichannel
panning VCA array.... (One in - 5 outs).

gary


--- In wiardgroup@yahoogroups.com, "Mike Marsh" <michaelmarsh@s...> wrote:
> OK, it's in the Files section.  The mult is 3 x 4, though but I bet 
> you could modify the fpd without too much trouble.  I also posted 
> the mixer panel; another wonderful addition to the Blacet modular.  
> Ken Stone makes some pretty amazing stuff!
> 
> Mike
> 
> 
> --- In wiardgroup@yahoogroups.com, "Gary Chang" <gchang@c...> wrote:
> > Mike,
> > 
> > Please do post the Schaeffer file - a 2 x 5 mults on a 1.5 inch 
> panel
> > will perfectly fit as the last module in my system, and will feed 
> the
> > Blacet VCAs (the panning patch) from the pair of Lowpass Gates.
> > 
> > Gary
> > 
> > 
> > --- In wiardgroup@yahoogroups.com, "Mike Marsh" 
> <michaelmarsh@s...> wrote:
> > > Hi All -
> > > 
> > > Gary's posts about the JAG + Blacet Dual VCA had some references 
> to 
> > > mults.  I know the Wiard 300 modules have lots of patching 
> options, 
> > > but the Blacet modules do not have as many.  In fact it is so 
> > > restricted that I built this mult - easy build, and cheap, too.  
> > > Inspired by my MOTM Mult.  A really handy addition to my growing 
> > > Blacet/Wiard modular.
> > > 
> > > If anybody wants the Schaeffer file for the panel I can post 
> that.
> > > 
> > > I also built a 5 input mixer based on Ken Stones DC MIxer board 
> in a 
> > > Blacet 2U.  Again, most handy!
> > > 
> > > Mike