Vintage Synth Repair

Hello Terje, 

that´s clear to me... but not what I was looking for.

I have to adjust the overall sensitivity of the strap below the keys. Even if I have the selection knob at let´s say 8:00 o´clock the effect is far too early because the force strip below the keys is far too sensitive, or is triggering too early. That means, if I push the key with normal strength the effect is there immediately, like the hub of the key is too short. 

Is there an internal adjustment, or do I have to adjust the force strap mechanically by lowering it in relation to the keys?

Best regards

--- In vintagesynthrepair@yahoogroups.com, Terje Winther <terje.winther@...> wrote:
>
> There is an amount pot on the lower left side of the panel, between  
> the selection knob and the white slider. Goes from 0 to 10.
> 
> Terje
> 
> 
> Den 25. aug.. 2011 kl. 00.03 skrev ambrosia800:
> 
> > Where can I adjust the sensitivity of the force sensor?
> > It´s doing the job too well at the moment..
> >
> >
> > 
> 
> Terje Winther
> terje.winther@...
> http://www.wintherstormer.no/
>